Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Gifkins jig
-
20th March 2005, 07:15 AM #1Deceased
- Join Date
- Jan 2005
- Location
- Camberley UK
- Age
- 75
- Posts
- 366
Gifkins jig
I have only seen one demo of the Gifkin jig in the UK.
The jig works well and looks real easy if you are using two routers.
What happens in practice cutting the pins if you have one router???
Say you have to do 6 to 8 draws
-
20th March 2005 07:15 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
20th March 2005, 10:01 AM #2
If all the draws are the same size, then all the pins, then change bit then all the tails.
If they are all different, then it takes me about a minute and a half to change over bits including height realignment then start cutting again.
It does pay to have a router with which you can change bits quickly (thanks Triton).Burn
When all points of view have equal time The chatter of idiots will drown out the wise