Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: GMC PT330 Planer Blueprint
-
1st June 2012, 12:35 PM #1New Member
- Join Date
- May 2008
- Location
- Higgins
- Age
- 78
- Posts
- 2
GMC PT330 Planer Blueprint
First post - fingers crossed.
Recently tipped planer on its end to clear out shavings from the dust shute and low and behold a metal block fell out of the shute!
The block is 22mm long, 24mm high and 24 mm deep. It has a 15mm hole throughout and a bevel along the top edges.
Can I get some help please? Suggestions, blueprints etc? Unfortunately the Instruction Manual does not get down to this level of detail.
-
1st June 2012 12:35 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th June 2012, 11:06 AM #2Member
- Join Date
- Nov 2010
- Location
- not quite Adelaide
- Posts
- 61
maybe helpful
try this....most of the 12 1/2 thickies are similar so this might give you some clues....
http://www.ereplacementparts.com/ima...obi/AP1301.pdf
-
12th June 2012, 09:43 AM #3New Member
- Join Date
- May 2008
- Location
- Higgins
- Age
- 78
- Posts
- 2
Surfmat,
Thanks for the diagram. It really helped me understand the purpose of the piece. I also tried Grizzly.com and it looks like I will be able to buy any needed parts.
Similar Threads
-
GMC Thicknesser Blades for Model PT330
By asayer in forum TRITON / GMCReplies: 13Last Post: 20th September 2011, 09:45 AM -
Convert electric planer to statİonary table planer
By nezih ahmet in forum HAND TOOLS - POWEREDReplies: 7Last Post: 6th June 2011, 12:36 AM -
blueprint for a John5 telecaster
By soultribe in forum MUSICAL INSTRUMENTSReplies: 6Last Post: 7th March 2009, 05:02 PM -
GMC PT330 Thicknesser
By Milar in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 3Last Post: 5th January 2009, 10:46 AM -
Thicknessers: PT330 vs. AP13AK vs. CT-317
By Woodwould in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 2Last Post: 5th November 2008, 10:13 PM