Thread: GMC Thicknesser Blades for Model PT330

Asayer
I thought the Ryobi blades fitted ??

Regards Brian

Originally Posted by bab600

Asayer
I thought the Ryobi blades fitted ??

Regards Brian

Thanks Brian,
I've been doing some searching and although I can find a few people mention they "should" fit, I can't find any dimensions or pictures of the Ryobi ones.

Also the blades I have are 333mm long and from what I've read the Ryobi ones are 312mm.

Also do the Ryobi ones have holes in them?

Have a look on Ebay for the store cheaptools at Bairnsdale Vic. You will usually find them under the triton stuff. I got blades from them for my triton 330mm thicknesser and they were in a package labelled GMC. They are as you descibed with 3 holesand 67 mm from the end.

Originally Posted by mcintoad

Have a look on Ebay for the store cheaptools at Bairnsdale Vic. You will usually find them under the triton stuff. I got blades from them for my triton 330mm thicknesser and they were in a package labelled GMC. They are as you descibed with 3 holesand 67 mm from the end.

Thanks mcintoad,
After posting my initial post I also emailed them and they got back to me this morning telling me they have them and to give them a call.

Thanks for the help

FYI: I have order the blades from Cheap Tools. $39 a pair, $10 postage

Blades received and they are the right ones.
Still in the original GMC packaging.

Well Done You

are the blades double edged?
Because after your initial question I checked mine and I'm probably due for a new set


Regards Brian

Originally Posted by bab600

Well Done You

are the blades double edged?
Because after your initial question I checked mine and I'm probably due for a new set

Sure are, exactly the same as the dimensions from my first post.

The packets says they are for the GMC thicknesser model PT330

Great information guys, i have just bought said GMC thinknesser and was only just thinking where i would get replacements from and you have just saved me a lot of looking around.. might have to get a set to keep on the shelf for replacement time....

thanks

ps - love my new toy,

Blades from the same size OZITO planer will fit GMC planer, I ordered a set thru local bunnings & there identical. Hope this helps. J&J

Originally Posted by j&j

Blades from the same size OZITO planer will fit GMC planer, I ordered a set thru local bunnings & there identical. Hope this helps. J&J

From what I found out there was actually two different GMC thicknesser models.
The PT330 which I had had different blades and the OZITO blades were different and Bunnings did not have them available.

my pt330 planer, purchased may 2008 from bunnings, after I wore the first set of blades out I seen my friendly bunnings tool man for replacements. He rang ozito & confirmed measurements from my blades which were supplied soon after. The blades are identical. Part numbers on package are ;spo#010488
& spozt1500wa-056
Dimensions are the same as quoted elsewere in this forum
I hope this clears up any confusion.

Originally Posted by j&j

my pt330 planer, purchased may 2008 from bunnings, after I wore the first set of blades out I seen my friendly bunnings tool man for replacements. He rang ozito & confirmed measurements from my blades which were supplied soon after. The blades are identical. Part numbers on package are ;spo#010488
& spozt1500wa-056
Dimensions are the same as quoted elsewere in this forum
I hope this clears up any confusion.

Thanks for the info.

When I went to my local Bunnings they said the only blades they had or could supply were the wider ones that didnt fit the PT330.

If i have trouble getting them in the future I'll go back and hassle them.