Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Saw guard support for Mk3
-
28th March 2021, 11:05 AM #1GOLD MEMBER
- Join Date
- Nov 2009
- Location
- Canberra
- Posts
- 1,296
Saw guard support for Mk3
The Triton Club of the ACT receives requests from people looking to fit a 2000 saw guard to their Mk3 workcentre. For a while Triton made a saw guard support to allow this conversion, but they are no longer available.
A picture of the 2000 saw guard support WCA334 is attached. 0006183_400.jpeg
The vertical support is just under 2mm thick.
Two conversion options seem possible, with step 1 being to make a base matching the MK3 base, out of hardwood. We are after all woodworkers! Then cut a 2mm kerf in this base to house the vertical support, to be glued in with epoxy.
Step 2 is either to obtain a WCA334 and cut the vertical support off for insertion into the wooden base, or else obtain a 2mm plate from elsewhere, preferably aluminium or other soft metal. The front edge should be shaped to a taper, as is the WCA334.
My club will shortly have a small supply of WCA334.
-
28th March 2021 11:05 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th October 2022, 10:30 AM #2New Member
- Join Date
- Oct 2022
- Location
- Sunshine Coast QLD Australia
- Posts
- 4
Hi Chrism3, going back in time but just wondering if you have managed to source the workcentre guard support wca334 as referenced early 2021. I've just bought a 2nd hand 2000 but failed to notice this was missing! Any help appreciated.
Many thanks
Dave
Similar Threads
-
WANTED:VIC Triton Workcentre 2000 - Guard support (metal thing the plastic saw guard attaches to
By mookschank in forum WANTED & WANTED TO BUY - in AustraliaReplies: 2Last Post: 25th March 2020, 05:36 PM -
WANTED overhead guard and support
By Doubles in forum TRITON / GMCReplies: 2Last Post: 22nd March 2015, 04:44 PM -
Guard Support WC2000
By Thommo in forum TRITON / GMCReplies: 8Last Post: 17th December 2014, 04:09 PM -
Wanted: guard support and overhead guard triton saw bench.
By guerd87 in forum TRITON / GMCReplies: 1Last Post: 17th February 2014, 10:55 AM -
WCA334 Blade Guard Support
By ben73 in forum TRITON / GMCReplies: 3Last Post: 28th December 2009, 02:54 PM