Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: height winder
-
3rd October 2005, 01:17 PM #1New Member
- Join Date
- Jun 2005
- Location
- newcastle
- Posts
- 1
height winder
i am installing the height winder but cannot work out where the "brace" is to connect to chassis hook
-
3rd October 2005 01:17 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
3rd October 2005, 03:17 PM #2Banned
- Join Date
- May 2005
- Location
- Burnett Heads, QLD
- Age
- 64
- Posts
- 1,535
hi and welcome to the forum.
I think you are referring to the small plastic piece that clips over the round rod near the height winder with a rectangular slot facing upwards. if so the brace to which you referis onthe underside of the sawtable top.
Once you have put the sawtable top on and engaged the chassis hook for the first time, remove the top immediately and make a mark on the aluminium rails at the end of the height winder chassis so you can align the chassis easily every time from now on, a real timesaver ifyou have a dustbag. if you dont have a dustbag, get one. hope this helps
-
19th October 2005, 10:42 PM #3Originally Posted by ejay
But maybe you've now solved it....
Hey Doug...How do I get "them" on my desktop???? Better not..woodn't get much wood stuff done. ....apart from getting a woody!!!!'You can't change the direction of the wind, but you can adjust your sails'
-
19th October 2005, 11:51 PM #4Banned
- Join Date
- May 2005
- Location
- Burnett Heads, QLD
- Age
- 64
- Posts
- 1,535
Originally Posted by JaD
feeling like working with some hardwood, JaD? just right click your mouse right between them then click on save picture then she's yours
-
20th October 2005, 12:38 AM #5
ejay...
The Hgt winder is supplied with two RED plastic chassis hooks. One to suit the Mk3 and the other to suit 2000 series.
One is kind of or "H" shape - with one open end designed to clip over the round bar on the height winder (that would now be attached to the chassis), and the other open end wider, and flatter at the bottom, and it sits facing up, and engages to the underside of the table top, over the most rearward cross brace.
The Mk3 clip (if I remember) is more of an offset "Y" shape, but works in a similar way to the Series 2000 clip - It looks and fits differently to the underside of the tabletop, because the tops are so different.
Make sense?
Dohboy
-
20th October 2005, 05:53 PM #6
-
20th October 2005, 08:59 PM #7
Never too far away...
And you never know who is watching ! (unless you look at the list)
Dohboy
-
20th October 2005, 11:08 PM #8
Similar Threads
-
Dustbag and height winder conflict
By Tonz in forum TRITON / GMCReplies: 30Last Post: 18th May 2004, 10:53 PM -
Height Winder probs
By Intheshed in forum TRITON / GMCReplies: 13Last Post: 1st April 2004, 02:24 AM -
Fitting height winder attachment to WC2000 purchased in 1999
By Ross B in forum TRITON / GMCReplies: 3Last Post: 25th September 2002, 09:35 PM -
Blade Height Winder Review
By Noel Butcher in forum TRITON / GMCReplies: 6Last Post: 13th May 2000, 02:31 PM