Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Noisy TRA001?
-
4th January 2014, 01:43 AM #1Retired
- Join Date
- May 2012
- Location
- Canberra
- Posts
- 1,820
Noisy TRA001?
Just purchased a second hand TRA001
It's in excellent condition. To make sure it wasn't abused I took out the bushes and check them over. They are almost full length, so little use as the seller said. It's nice and clean. I can see it wasn't cleaned with compressed air to hid something....
What concerns me is the noise. It's not grinding or chewing anything up internally, but compared to my Festool 1400 router, it's as rough as guts. It's also bloody noisy.
Turning it on and letting it run does not impress me with its "precision" label. It like listening to a home built v8 with a cracked piston compared to the smooth hum of a Ferrari.
Is this "normal"?
Perhaps I should post a video.
-
4th January 2014 01:43 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th January 2014, 10:14 AM #2Senior Member
- Join Date
- Jun 2013
- Location
- Geelong
- Posts
- 431
Noisy as in bearing noisy which means a bearing change. Or noisy as in electrical which might be a bad sign
-
4th January 2014, 08:47 PM #3SENIOR MEMBER
- Join Date
- Dec 2010
- Location
- Melbourne
- Age
- 79
- Posts
- 601
Sounds like that is why it was sold,my guess is the previous owner knew the bearings were shot and decided to move it on.
Get it fixed and you should have a good tool for many years to come.
-
4th January 2014, 09:04 PM #4
I have one of these and they are noisy units. Impossible to say from here but there may be nothing abnormal
Similar Threads
-
TRA001 2400w vs TRA001 2000w ... I think I've got it sorted
By Tangram in forum TRITON / GMCReplies: 3Last Post: 24th March 2011, 10:11 PM -
Noisy Bandsaw
By brownie98 in forum BANDSAWSReplies: 18Last Post: 19th August 2010, 09:54 PM -
Why is my lathe so noisy?
By Tiger in forum WOODTURNING - GENERALReplies: 14Last Post: 3rd March 2009, 07:36 PM -
Noisy SCMS
By Tiger in forum HAND TOOLS - POWEREDReplies: 12Last Post: 31st July 2008, 02:50 PM -
Noisy helicopters
By Allan at Wallan in forum WOODIES JOKESReplies: 0Last Post: 30th April 2008, 06:17 PM