Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Give away a Mark 3 work center
-
10th February 2012, 07:19 AM #1well aged but not old
- Join Date
- Sep 2004
- Location
- Brisbane
- Posts
- 925
Give away a Mark 3 work center
I have a well used Triton Mark 3 Work Center to give away. It comes with a saw stabilizing bracket. While it has a few scratches after cutting a whole lot of timber over many years I was using it up until 2 days ago and when set up and used properly cuts very accurately.
I would like to give it to somebody who will appreciate it as much as I did.
I live in South Brisbane and would prefer it to be picked up if possible.
Send me a PM if you are interested.My age is still less than my number of posts
-
10th February 2012 07:19 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th February 2012, 08:02 AM #2
Someone take it quick before I drive from Mel to Bris. I had one (still do I guess), But I lent it to a friend. He put his BIG BIG toolbox right in the middle, Warped the top deck a little bit and the cradle that holds the saw a lot. I've got it on the side and I will get another saw cradle sometime somewhere. Means I have a perfect 9 degree saw.
-
10th February 2012, 08:55 AM #3
-
10th February 2012, 08:46 PM #4well aged but not old
- Join Date
- Sep 2004
- Location
- Brisbane
- Posts
- 925
It has been taken. It served me well and I hope that somebody else can beefit from it now.
My age is still less than my number of posts
Similar Threads
-
Work center 2000 top
By The Old Bloke in forum TRITON / GMCReplies: 0Last Post: 8th December 2010, 08:52 AM -
work center and router table
By ssgt in forum TRITON / GMCReplies: 2Last Post: 2nd September 2009, 09:48 AM -
Which work center - MK3 or 2000 ?
By JBHELL in forum TRITON / GMCReplies: 7Last Post: 14th January 2004, 08:21 PM