Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Mk 111 power switch
-
3rd November 2020, 02:56 PM #1New Member
- Join Date
- May 2010
- Location
- Brisbane
- Posts
- 1
Mk 111 power switch
Hello
I have an old Mk111 workcentre. It has served me well over the years. The last time I went to use it the power switch was faulty. It turned on by itself ! Tried to bite me! I have plugged in an extension lead with a switch on it. Makes me feel a little safer.
What are my options re fixing the switchbox.
- Do I get one in from the UK for a WC 2000, or
- do I put up with it, or
- other options?
PS I don't have the room for a $2000 Carbatec table saw
Thanks
Noel
ADDED BY ADMIN
DISCLAIMER
No liability is accepted by UBeaut or the Wood Working Forum's administrators
or moderators for advice offered by members posting replies
or asking questions regarding electrical work.
We strongly advise contacting a Licensed Tradeperson for all electrical work.WARNING
Information supplied within posts is not to be considered as detailed formal instructions to complete a task.
Members following such information do so at their own risk
-
3rd November 2020 02:56 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
3rd November 2020, 03:14 PM #2
Something like these help?
ProRouter Switch woodworksupplies.com.au
Cheers,
Nathan
-
3rd November 2020, 06:23 PM #3.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,793
You will have to put it in a box but here's a cheap switch
10 Type Release Emergency Stop Electrical Switch for Industrial Worksho | eBay
You will need this one , #2 KJD12(230V 16A 4Pin)
-
4th November 2020, 08:40 AM #4
Or one of these. They are just plug and play so no wiring involved. Unfortunately most suppliers seem to be out of stock at the moment ie. Carrolls and Timbecon
Dallas
Similar Threads
-
New Foot Power Switch.
By BallaratBill in forum HAND TOOLS - POWEREDReplies: 19Last Post: 19th April 2018, 07:50 PM -
Router Table Switch - Power Strip?
By michhes in forum GENERAL & SMALL MACHINERYReplies: 13Last Post: 9th December 2013, 11:05 AM -
Switch for Sher Power lathe
By plantagenon in forum WOODTURNING - GENERALReplies: 2Last Post: 29th June 2011, 04:54 PM -
Triton Power Switch
By skot in forum TRITON / GMCReplies: 5Last Post: 25th August 2008, 09:50 AM