MK3 parts wanted

**PaulB80** · 4th May 2020, 11:08 PM

Hi All

I got given a working MK3 this weekend, but it's missing the protractor and the riving knife. For me, rip cuts are a bonus to my current setup, so not complaining but if I can get the parts Id be even happier.

I know these products are pretty rare now but I thought I'd try and ask anyway.

I believe the part numbers are:
WCA045 - Riving knife
and if there's one about:
WCA149 - Mk3 Protractor

But I'd also settle for a WCA338 - Cross cut fence if you it can fit to an MK3

I thought I might have more luck with the diving knife because some people tale them off. If you can help out please let me know, and how much you'd like and how much to post to Brisbane

Thanks,
Paul

**Bob Hall** · 5th May 2020, 11:02 AM

Hi Paul,
I think I can help you with those bits, but unfortunately they're locked away at the railway museum I volunteer at and of course, it's still closed up.
However, I will be doing a security patrol Tuesday next week, so I'll keep an eye on this thread and if you haven't had any other offers in the meantime, I'll check it out then.
Cheers, Bob

**crowie** · 5th May 2020, 10:45 PM

There's a big-ish Triton group in Canberra, maybe worth an email to them Paul... cheers, crowie

TOCACT

**PaulB80** · 6th May 2020, 10:15 AM

Originally Posted by Bob Hall

Hi Paul,
I think I can help you with those bits, but unfortunately they're locked away at the railway museum I volunteer at and of course, it's still closed up.
However, I will be doing a security patrol Tuesday next week, so I'll keep an eye on this thread and if you haven't had any other offers in the meantime, I'll check it out then.
Cheers, Bob

Thanks Bob - I really appreciate it - I managed to get a hold of a protractor - it's just the riving knife I'm chasing now.

Make sure the Railway Museum doesn't need anything though - I feel a bit bad taking it away

**PaulB80** · 6th May 2020, 10:19 AM

I contact the Triton Group and they were amazing. Chris (who is the secretary I believe) didn't have anything directly but keeping so close to the "pulse" of older Triton's he had a list of gumtree ads (which my search terms didn't find) and a few other leads which I'm still chasing. Can't speak highly enough of the guy - literally emailed back in a hour on multiple occasions - for no reason but to help. Just one of those things where you go "ah, beauty - there's still good people out there".

Cheers for this - this was a big help.

**Chrism3** · 7th May 2020, 11:42 PM

Paul,
that's kind of you. If my Triton forum daily update service was working I would have seen your post above and responded earlier. But it hasn't worked since about last June. Happy to help.
Chris

**Bob Hall** · 14th May 2020, 10:37 AM

Paul,
I did my patrol on Tuesday, but all I could find spare was the plastic shield to the riving knife. Searched high and low for the metal part, but to no avail. It might pop up in the future, so I'll keep an eye on this thread. Happy to send you the plastic bit if it's any help.
cheers, Bob

**PaulB80** · 19th May 2020, 08:29 AM

Hey Bob,

Just the fact that you took the time to check for me - I really appreciate it. I'm definitely more interested in the actual knife part (as opposed to the extractor section) so I'll politely decline your offer at this stage, but again, I do appreciate you having a look for me.

(Sorry about the delay - I've been away a few days)

**Bob Hall** · 19th May 2020, 09:59 AM

No problem, mate. If I do find the other part, I'll be in touch.
Cheers, Bob

Thread: MK3 parts wanted

Thread Tools

Search Thread

MK3 parts wanted

Similar Threads

Wanted - Hercus parts

Sawmill or parts wanted

Keg system or parts wanted

Mastercraft parts wanted

Posting Permissions