Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
-
1st August 2011, 12:05 PM #1New Member
- Join Date
- Feb 2009
- Location
- Burnie, Tasmania
- Posts
- 2
Mounting a router into older style table
Hi All I have recently obtained an older style triton router and jigsaw table but it is missing the mounting plate underneath to mount the router. Any ideas where to get the plate from? Is at this? TRITON WORKCENTRE ROUTER AND JIGSAW MOUNTING PLATE | eBay ? The table has no model number which makes it difficult but I can post pictures if needed. Cheers, Rob
-
1st August 2011 12:05 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st August 2011, 06:39 PM #2
Rob it is used both under and over, Rob a photo of the Triton you have will help date it.
I just happen to have a new one sitting here no box but all the bits are there, if you can't find one closer to home let me know.
-
1st August 2011, 06:47 PM #3
I agree, overhead and under table are the same mounting plate. The 2000 series should fit the Mk3 as well.
Edit: I had a Mk 3 router table that fit onto a Series 2000 unit. Series 2000 tables may require a different plate.Those were the droids I was looking for.
https://autoblastgates.com.au
-
1st August 2011, 07:00 PM #4
Sorry for the duff post (now removed). I'd overlooked the "Mk 3" part.
Ray
-
2nd August 2011, 09:35 AM #5SENIOR MEMBER
- Join Date
- Apr 2006
- Location
- Melbourne Victoria
- Posts
- 621
Rob
If you have the old series, with only a small round hole in the orange table about 50-60mm then the link you posted is correct.
If you have the current series, where there is a large rectangle hole, filled by a grey mounting plate then you need a lot more
(Posting a pic always helps saves any confusion)
-
2nd August 2011, 12:38 PM #6New Member
- Join Date
- Feb 2009
- Location
- Burnie, Tasmania
- Posts
- 2
Thanks to all that replied. Seems I have the older style table (pics attached this time!), wheelinround do you have one to fit this that are you interested in parting with? - please send me a PM and let me know, cheers Rob
-
3rd August 2011, 09:58 AM #7
Dean thats the one mine fits, its new never been used.
Similar Threads
-
Mounting a GMC 2050W router to a table
By jaguarrh in forum ROUTING FORUMReplies: 3Last Post: 21st May 2008, 02:52 PM -
Router Mounting into Triton Router Table
By Ivan in Oz in forum TRITON / GMCReplies: 13Last Post: 16th September 2006, 10:05 AM -
Router Table Mounting
By noodle_snacks in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 9Last Post: 25th June 2006, 03:49 AM -
Mounting the RTA300 Router table
By FredBear in forum TRITON / GMCReplies: 5Last Post: 17th August 2005, 09:53 PM -
Best router for table mounting
By lyptus in forum HAND TOOLS - POWEREDReplies: 9Last Post: 7th July 2005, 11:28 PM