Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Orbital Sander Tip
-
13th January 2000, 12:32 AM #1New Member
- Join Date
- Dec 1999
- Location
- Ballarat ,Victoria , Australia
- Posts
- 4
Orbital Sander Tip
The Velcro on the disk was damaged due to ouerheating, it was easily removed by carefully using a heat gun , and peeling the damaged Velcro off.Then when the disk was cool I cleaned up the surface by holding it lightly against the face of the wire brush on my bench grinder and allowing it to turn .I obtained a replacement self adhesive Velcro type pad from the local hardware store, this has attached firmly ,and is working well again. There was a considerable saving compared to the cost of the Triton replacement disc.
-
13th January 2000 12:32 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many