Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Question about the Multi Stand
-
3rd November 2004, 10:35 PM #1New Member
- Join Date
- Oct 2004
- Location
- UK
- Posts
- 8
Question about the Multi Stand
Could someone please tell me what width of wood you can clamp in the multi stand please, will it take 2" ?
I want to make a frame for my shed and have not enough room to work on the floor, but could do what I need if I can set the 2 outriggers (4" X 2") in the mutli stands and set the runners in between.
I've read the blurb on the triton site and done a search in this forum, but seem to have drawn a blank on the info I'm after.
Thanks for any help.
Chris.
-
3rd November 2004 10:35 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th November 2004, 04:17 AM #2GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
Its 32 or 38mm. You can also wind the screw clamp all the way out & use ordinary screws to hold the timber.
-
7th November 2004, 11:11 AM #3
Hi,
I measured and it will take 45mm plus some thin wood for padding.
regards
Les
-
7th November 2004, 11:37 PM #4New Member
- Join Date
- Oct 2004
- Location
- UK
- Posts
- 8
Thanks very much for your responses "lesmeyer" & "bsrlee". That helps me in my decisions.
Chris.