Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
30th July 2012, 08:05 PM #1GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Selecting Triton TRA001 router plunge modes
Hello, I have recently acquired a Triton TRA001 and have mounted it under a table, after removing the spring.
The plunge mode select button shown on the instruction manual and on various YouTube instruction videos have a push-in plunge mode selector button to engage the Handle winder Plunge mode.
However, my router does not have a button, rather a selector switch that turns, with two positions.
Can anyone please advise the function of this selector switch, and the correct position for me to use a Handle Winder Plunge and the Micro Adjuster when it is table mounted?regards,
Dengy
-
30th July 2012 08:05 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th July 2012, 08:42 PM #2Novice
- Join Date
- Apr 2012
- Location
- UK
- Posts
- 16
Hey take a look at this video for the TRA001 it might help you
the MOF001 has the push in button that you spoke of.
-
30th July 2012, 08:43 PM #3Novice
- Join Date
- Apr 2012
- Location
- UK
- Posts
- 16
sorry forgot the link!
https://www.youtube.com/watch?v=dfNG8kec7BE
-
30th July 2012, 08:53 PM #4GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
thanks for this link wood86. I have previously seen this one, but it is not very specific in relation to the handle winding and micro adjusting of height. The commentator appears to have a speech impediment, and it does not show the functions of the 2 position switch on the handle, although it indicates that you turn it clockwise from the horizontal position for a free plunge mode.
regards,
Dengy
-
30th July 2012, 09:06 PM #5Novice
- Join Date
- Apr 2012
- Location
- UK
- Posts
- 16
Yeah sorry, its the only one i could find relating to the TRA001
-
30th July 2012, 10:16 PM #6GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Hi, I did find a web sites here and here that did explain how to select the free plunge mode in detail, but nothing about how to use the selector switch for the Handle winder Plunge mode and using the Micro Adjuster.
For the free plunge mode, you turn the switch clockwise, then push it in (with some inherent difficulty), then turn it some more. This locks the rack and pinion out, which seems a strange way of doing so. I would have thought that you unlock it to go into free plunge mode.
In selecting the Handle Winder Plunge mode, I presume you turn it ant-clockwise. Do you have to push the switch in too?regards,
Dengy
-
30th July 2012, 10:50 PM #7
This might help
Hugh
Enough is enough, more than enough is too much.
-
5th August 2012, 08:31 AM #8GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Many thanks for that scanned extract, Hugh, it is exactly what I was after.
Following the instructions, I was able to select the handle winder plunge mode OK. The trick is in pushing the body of the router up ( from under the table) - the yellow rotary switch then clicks into position nicelyregards,
Dengy
Similar Threads
-
Triton TRA001 to MK3 router table
By Lyle in forum TRITON / GMCReplies: 17Last Post: 10th December 2009, 08:52 AM -
Router table for Triton TRA001
By skygazer in forum ROUTING FORUMReplies: 2Last Post: 6th October 2007, 08:46 AM -
triton tra001 plunge depth?
By blues in forum TRITON / GMCReplies: 13Last Post: 1st June 2007, 10:32 PM