Thread: Stick on rulers for Mk3

Carbatec have stickon rules. I don't know if the width is right, so you might have to cut them down.

Originally Posted by Peter1954

Does any one know of where i could buy the transfer type inch segment ruler for the triton mk3. Over the years it has gotten sp bad, i cant read it no longer. Also do any of the triton 2000 parts fir the Mk 3.

Peter

Please reply if any to

[email protected]

Many thanks

I doubt that you can get them anymore, the CT ones are to thick to fit in the MK3 tabletop depression and still use the fence.

What you can try is to get some cheap dressmaker tape measures ( Bunnings may still have them as well) and stick them on with doublesided carpet tape. I have used them on a number of jigs and they would fit.

Peter.

Would these be helpful? You will need to stick them down though. You will need to check whether they have them in imperial.

Scales

Another option, although more expensive is Kreg.

I think I recall Rockler also sell stick on scales.

HERE

Thanks people for the replies. I ended up going to a sewing machine shop here in Maryborough, and they had a self adhesive sticker costing $5.35. Arrived home and blow me down, it was almost the identical size to the original triton ruler. So with a bit of thinners, and time, i rubbed off the old ruler and stuck on the new. WOnderful i can now measure with out squinting lol

Thank again
Peter
Maryborough, Queensland