Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: New style Triton Super Jaws
-
14th February 2019, 05:26 PM #1Senior Member
- Join Date
- Apr 2008
- Location
- Perth
- Posts
- 289
New style Triton Super Jaws
Hallo
I will get straight to the point. Bought a new style Tritin Super Jaws in mid 2018, in my opinion it is a pile of crap. Blasted thing will not stay clamped to any kind of material I put in there. Have stuffed around checking everything underneath, cleaned the componets, taken the moving jaw off, cleaned its sliding rails, if thats what it is called. Have the metal jaws for welding etc, flat, angle, round, square tube, even wood wont hold tight in there.
Had the original super jaws until last year when some low life walked up my drive and repurposed it, so I am not new to the thing.
What i see wrong with the new one, the moving jaw moves up a few mills when clamping, this causes the bit your clamping to move upwards, round stock is the worst, the adjusting pedal stays down extended, no amount of pushing that will it reset to get extra clamping, on the occasion it does reset, thinking it is going to do what is supposed to do, throw the red switch to lock, and what i have just clamped falls out. Am over it.
Does anyone know if any other product that can be bought in Australia that is similar to this problem immigrant.
DD
-
14th February 2019 05:26 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Triton Super Jaws
By Perry The Pom in forum WOODWORK - GENERALReplies: 5Last Post: 1st January 2017, 09:47 AM -
Super Jaws - Triton + clones
By Bob38S in forum TRITON / GMCReplies: 6Last Post: 26th November 2009, 07:45 PM -
Triton Ultimate Super Jaws
By Bad Woodworker in forum TRITON / GMCReplies: 1Last Post: 9th June 2008, 01:48 AM -
Super jaws
By Carry Pine in forum TRITON / GMCReplies: 13Last Post: 11th November 2007, 03:18 PM -
super jaws
By ptc in forum TRITON / GMCReplies: 1Last Post: 2nd June 2004, 11:05 AM