Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: triton 1/2 to 1/4 collet
-
31st January 2021, 07:52 PM #1Senior Member
- Join Date
- Jul 2019
- Location
- mid north coast
- Age
- 65
- Posts
- 356
triton 1/2 to 1/4 collet
Iv'e just discovered that a standard collet does not hold a 1/4 router bit in place very well on my TRA001
does anyone know where I can buy either a genuine triton collet or other brand that will do the job
the new one I just bought doesn't seem to clamp onto the 1/4 shaft at all
cheers
Bryan
-
31st January 2021 07:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
31st January 2021, 08:14 PM #2
I've found this PDF another forum member passed onto me when I had this issue. I'll track down where I bought my replacement chuck because I had some router bits slip during operation and the replacement was amazing
I'll try find the details of what I picked up
Cheers
-
31st January 2021, 08:19 PM #3
I think I picked up this one.
Tool Spares Online. COLLET ASSY 1/4"
Sent from my Nokia 5.3 using Tapatalk
-
31st January 2021, 09:30 PM #4
There is also this one from Gifkins. Judging by their description it should have a good grip on the bit.
Dallas
-
31st January 2021, 09:41 PM #5Senior Member
- Join Date
- Jul 2019
- Location
- mid north coast
- Age
- 65
- Posts
- 356
Similar Threads
-
Collet for Triton router
By Richard F in forum TRITON / GMCReplies: 17Last Post: 15th September 2017, 07:19 PM -
Triton 1/4" collet
By chemfish in forum ROUTING FORUMReplies: 3Last Post: 30th December 2012, 11:22 PM -
Triton mof001 collet
By kramsilliw in forum ROUTING FORUMReplies: 1Last Post: 2nd July 2012, 10:45 PM -
Help! My Triton collet is stuck, and it's not the typical stuck collet!
By old750 in forum TRITON / GMCReplies: 1Last Post: 1st November 2009, 10:03 PM -
6mm or 8mm collet for triton router
By nigeb in forum TRITON / GMCReplies: 7Last Post: 11th December 2007, 11:27 PM