Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
-
26th October 2009, 09:38 PM #1
Triton Biscuit Joiner - was the diff BJA001 & BJA300
Hey all,
been thinking about getting a buscuit joiner and since I have a WorkCentre 2000 and a router table (RTA300), I thought about a Trition one.
However I have noted there seems to be two different types available around:
BJA001 & BJA300
Can a Triton expert out there tell me which one I should get(if I can)?
Or is it not worth paying $100+ when I can get a Carbotec hand held for $150.
Thanks in advance.
AS
-
26th October 2009 09:38 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th October 2009, 10:21 PM #2
You'd need the BJA300 for a WC2000. The BJA001 is the earlier model, for earlier Workcentres.
The BJA300 is OK if you only want to do slots at 90 or 45 degrees and either only want to use Triton's own biscuits (non-standard size) or standard size #20 only.
If you want to do angles other than those above, or if you want to use standard size #0 and #10 biscuits (and be able to take the jointer to the workpiece e.g., kitchen counter tops, etc.), then it's not for you.
TBH, having tried and demoed it for several years, I still reach for my hand-held rather than set up the BJA300. HTH
Ray.
-
27th October 2009, 05:03 PM #3
Thanks heaps for the advice Ray.
I tending towards the Triton option but you have convinced me to go with the hand held option, most likley the Archer or maybe the Festool Domino.
Off to do some research.
Thanks again
-
31st October 2009, 06:37 PM #4
If you need a BJA300, I have them in stock. EBAY store boystoystoolshop or email [email protected]
Thanks,Eagle
I am not young enough to know everything.
-
31st October 2009, 09:52 PM #5
Thanks Eagle but I've decided to go with either a hand held version.
-
23rd November 2009, 05:09 PM #6The Apprentice
- Join Date
- Oct 2009
- Location
- Wantirna Sth. Melbourne
- Posts
- 253
Hi Eagle,
your boystoystoolshop does not appear on ebay....????????????
enlighten me
Thanks
Jack
-
24th November 2009, 11:18 AM #7
I found it here on eBay
None of the promised Triton though - only a couple of cable locks"Clear, Ease Springs"
www.Stu's Shed.com
Similar Threads
-
Selling Triton Biscuit Joiner (BJA300)
By ACT Mal in forum TRITON / GMCReplies: 3Last Post: 12th November 2008, 03:27 PM -
New Router table (RTA300) - old Biscuit Joiner (BJA001)
By Noel White in forum TRITON / GMCReplies: 6Last Post: 2nd March 2006, 09:04 PM