Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 31 to 38 of 38
Thread: Triton Catalgoue
-
1st January 2008, 10:34 PM #31
I am after a plunge drill myself. Put a thread out in the "Buy, Swap and Sell" section. If the Triton TDA100 is no longer available is there another brand? I am building a rather large book shelf which i need to screw and glue together on site. I want to pre drill screw holes but can't on my drill press. Throat not wide enough therefore would like a plunge drill to make accurate holes.
If you can do it - Do it! If you can't do it - Try it!
Do both well!
-
1st January 2008 10:34 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th January 2008, 01:14 PM #32
thanks for the heads up on the catalogue. I am getting the 2007 model put on now. Not sure why it wasnt already done.....it should have been!!
Cheers,Eagle
I am not young enough to know everything.
-
5th January 2008, 09:10 AM #33
When I went to Bunnies the other week for the demo LOMl had picked up one of the Triton special order catalouges forgot about it and pulled it of the back of the car during the week.
still not as good as seeing it for real like they say don't believe everything you read
-
6th January 2008, 11:06 AM #34
You can always let me know what you want to see - might not be able to arrange it in the flesh, but I should be able to make a video of whatever you want to see being used in anger...
"Clear, Ease Springs"
www.Stu's Shed.com
-
25th March 2008, 10:00 PM #35
-
25th March 2008, 10:25 PM #36
I'm trying to get an electronic copy of the 2008 one - lots of new tools in it!
Who knows about the website - though Eagle was sorting it out ages ago. I just checked, and it's all the 2006 only."Clear, Ease Springs"
www.Stu's Shed.com
-
25th March 2008, 10:38 PM #37
That would be good! I'm running out of things to buy from the old one
Maybe 'Eagle' is flat out with the clearance of discontinued lines on eBay ?"May your dreams of today
be the reality of tomorrow"
-
26th March 2008, 08:23 PM #38GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
Ernknot:
1) You CAN'T have my Triton cordless
2) there is a gadget that you can use with any drill that will take one of the 'hose clamp' type handle attachments. It is a very basic drill press that you clamp your drill into by the parallel section. I have seen 2 types - the one which needs the chuck taken off your existing drill - seems to be popular in the US for some reason - and the one that Medalist brought in, which had 2 guide bars that could be pushed thru' the base to make it self centering - I have one of the Medalist ones permanently attached to a cheap 'Arlec' drill - it also has built in 'V' blocks for pipe & dowels. There have been a few importers other than Medalist - check Mitre10 or a big Bunnies
Similar Threads
-
Which to buy ? Triton Workcentre 2000 or Triton Powered Saw Table
By Plushy in forum WOODWORK - GENERALReplies: 5Last Post: 6th May 2007, 05:58 PM -
Is GMC-Triton gear the same High Quality as the Triton Saw and Router?
By barrysumpter in forum TRITON / GMCReplies: 18Last Post: 19th April 2006, 06:18 PM -
Triton Table withMakita b36 against Bosch and Triton
By Phil Smith in forum ROUTING FORUMReplies: 0Last Post: 1st December 2003, 03:10 PM