Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
7th May 2016, 08:32 PM #1GOLD MEMBER
- Join Date
- Jan 2009
- Location
- Australia
- Posts
- 1,222
Triton work center and Magswitches
Has anyone recently used Magswitches featherboards and guides on the Tritons.
Coments for/against. I am thinking of trying them out. Sawtable router and bandsaw.
Good bad indifferent.
Heard the quality and strength are suspect.
Lyle.
-
7th May 2016 08:32 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th May 2016, 05:58 PM #2Intermediate Member
- Join Date
- Jul 2009
- Location
- Melbourne
- Posts
- 45
Hi Lyle,
I use this one from Carbatec occasionally on the WC2000. It is extremely robust and when locked in place does not move. You get what you pay for:
https://www.carbatec.com.au/machiner...oard-magswitch
I have also recently ordered this featherboard as well. I plan on recessing a t-track into the face of my sacrificial fence and this will facilitate the installation of this featherboard and provide downward support (hopefully) to pieces being ripped:
https://www.carbatec.com.au/health-s...x-featherboard
Cheers
Trav
-
16th May 2016, 06:52 PM #3
I have used the Magswitch as mention by the member above on the Triton. It is quick and easy to setup.
-
17th May 2016, 12:02 PM #4GOLD MEMBER
- Join Date
- Jan 2009
- Location
- Australia
- Posts
- 1,222
OK, thanks for the replies. Will look to purchase them when a good deal comes along again.
Lyle.
Similar Threads
-
Give away a Mark 3 work center
By chook in forum TRITON / GMCReplies: 3Last Post: 10th February 2012, 08:46 PM -
Work center 2000 top
By The Old Bloke in forum TRITON / GMCReplies: 0Last Post: 8th December 2010, 08:52 AM -
work center and router table
By ssgt in forum TRITON / GMCReplies: 2Last Post: 2nd September 2009, 09:48 AM -
Which work center - MK3 or 2000 ?
By JBHELL in forum TRITON / GMCReplies: 7Last Post: 14th January 2004, 08:21 PM