Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 10 of 10
  1. #1
    Join Date
    May 2000
    Location
    SOUTH AUSTRALIA
    Age
    63
    Posts
    147

    Question Triton Circular Saw

    Has anyone out in woodies world bought and hopefully putting to good use the Triton saw .Just would like to know if it is good as claimed in triton 2000 workbench and whats it like to use free hand.As my Makita will give up the ghost in near future so ideas now would be a great help to try and get that ilusive christmas bargain buy on good tools
    regards steve

    ------------------
    Constant Sinking Feeling

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    May 2000
    Location
    Clovelly Park SA
    Age
    54
    Posts
    729

    Thumbs up

    G'day Funky,

    Have had the Triton saw for about 6 months now, and can not fault it! I had a 7 1/4" before that and the difference is huge. If anything the accuacy that can be gained is enough to make it a worthwhile purchase.

    As for handheld use, I haven't used it out of the table, I use my old 7 1/4".

    Hope this helps,

    Gazza.


    ------------------
    Bring on the Triton Router!
    Greatest Movie Quote Ever: "Its good to be the king!"
    ____________________________

  4. #3
    Join Date
    Dec 2000
    Location
    sydney
    Posts
    9

    Post

    the triton saw for hand held use is AWESOME!A hefty piece of machinery but powerful enough to cut through virtually anything...heaps of guts means no jamming

    Originally posted by gazaly:
    G'day Funky,

    Have had the Triton saw for about 6 months now, and can not fault it! I had a 7 1/4" before that and the difference is huge. If anything the accuacy that can be gained is enough to make it a worthwhile purchase.

    As for handheld use, I haven't used it out of the table, I use my old 7 1/4".

    Hope this helps,

    Gazza.




    ------------------

  5. #4
    Join Date
    Dec 1999
    Location
    Jindabyne, NSW
    Posts
    13

    Talking

    Hi Steve,

    I bought the saw about a two months ago as an upgrade from an old Bosche 7 1/4" and can only praise it. I have the standard 40 tooth blade it came with and have been very impressed by both the quality of the rip and accuracy of the cut. It sits very sturdy in the workcentre and has a very impressive build quality. I have the new pressed steel base for it mounted in my 2000 centre and took some time to calibrate it which, considering the quality of the cuts is both necessary and well worth it. It is one beast of a machine to handhold and I prefer to use the old Bosche for this if it suits the purpose. When the budget allows I would like to try the 60 tooth blade though this can wait.
    I paid $298 delivered for mine from Hardwareshop.com.au which still seems reasonably competitive. Hope this helps and good luck with whatever you decide to buy.
    Ang


  6. #5
    Join Date
    Jun 2000
    Location
    Auckland, New Zealand
    Posts
    107

    Thumbs up

    I too have the Triton Saw and have used it "freehand" & table mounted.
    It is heavy but I feel this gives more positive control as it is less of a bugger than my old Skill 7.25 which used to shake its head on denser material.
    The acuracay with the saw's fence and angles are spot on.

    Mounting in the Triton table is craft that has to be mastered but does pay divedends - I have mine to +0.02mm this is quite well within my needs.

    The Triton Tables height winder kit needs a bit of thought - the whole shebang is held inplace with a plastic thingamy and the saw's mounting frame moves within the table 5-10mm when cutting. I am thinking of locking it in a sleve so there is no fore and aft movement.
    Any thoughts chappies?

    Sandy across the ditch

  7. #6
    Join Date
    Dec 1999
    Location
    Jindabyne, NSW
    Posts
    13

    Question

    Hi Sandy,

    I just installed my BHW yesterday and noticed the same problem. I tried packing out the new red clip with some gaff tape though this did not work very well. It seems to be an oversight in design as a replacement clip really needs to snap into place to be effective.
    Anybody have the BHW and come up with a fix? I would sure appreciate it.

    Cheers and a Merry Christmas to all.
    Angelo
    Ang


  8. #7
    Join Date
    May 2000
    Location
    SOUTH AUSTRALIA
    Age
    63
    Posts
    147

    Post

    I have the new pressed steel base and hieght adjuster with 9 1/4 makita saw in it the plastic clip that stops the base moving has a habit of turning over so I found when you put the table back on if you change things etc you have to make sure clip is the right way up or it will move a bit when in correctly it doesnt appear to move. hope this helps
    Steve
    Constant Sinking Feeling

  9. #8
    Join Date
    Jan 2001
    Location
    New Plymouth, New Zealand
    Posts
    1

    Thumbs up

    I've just bought a Triton saw together with a 2000 Workcentre and planer attachment. I was looking for accuracy and was going to buy a cast iron saw table but decided on Triton after reading comments posted on this forum.
    I have not been disappointed.
    I found the Triton saw easy to adjust and accurate to a fraction of a mm when set up correctly.
    The saw power is ample (2.4kW is about 3HP) and the 40T TCT blade eats green 4x2 easily.
    One slight quibble, be careful not to wind the height adjusting lever off its holding bolt when adjusting the spline for lock tension. Its a real fiddle to get back on!
    Apart from that 10 out of 10.

  10. #9
    Join Date
    Dec 1999
    Location
    Jindabyne, NSW
    Posts
    13

    Exclamation

    I sent Triton an e-mail asking about the problem with the catch and today received a reply from them. They claim that the whilst the movement should not present a problem and that should I have a problem with the new catch to let them know and they would send me a new one. They also mentioned that they had received a number of inquiries about this problem and that a new catch is being designed and will be available by April.
    I have since added more packing to the inside of the u shaped catch and this seems to have reduced the movement to around a centimetre.
    Hope this helps.
    Regards,
    ang
    Ang


  11. #10
    Join Date
    Jul 1999
    Location
    Glen Iris, Vic, Australia
    Posts
    2,196

    Post

    The sliding plate stabalizer was mentioned and questioned in the following review of the height winder.
    http://ubb.ubeaut.com.au/ubb/Forum8/HTML/000020.html



    ------------------
    Thanks,
    Barry G. Sumpter
    Proud Tritoneer

    Thanks,
    Barry G. Sumpter
    May Yesterdays Tears Quench the Thirst for Tomorrows Revenge

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •