Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
-
28th January 2014, 08:17 AM #1Member
- Join Date
- Feb 2010
- Location
- Hervey Bay, QLD
- Posts
- 89
First Triton Purchase - 2nd Hand Powered Saw Table
Hi all,
Well I purchased my first triton product last night. Its a second hand Powered Saw table (really wanted to get a 2000) but this one came up local for $50 so I really hope its worth it.
Seems in good condition, did not come with a saw though. I have a Hitachi C9 235mm saw here - will this work well in this bottom line Triton table?
I have read some info regarding saw slump - Is this from certain model saws or just large saws in general? The C9 is quite a beast of a saw.
Any info anyone has would be great.
John
-
28th January 2014 08:17 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th January 2014, 04:13 PM #2Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
I think you should be fine. That is a good saw and if you look closely
at the Triton saw it is fairly obviously modeled on the Hitachi C9.
-
28th January 2014, 04:42 PM #3Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
I thought that the powered saw table was designed for the small Triton 184 mm saw and as such it was a dud. The saw thatcame with it was not very good according to reports on the forum at the time.
For details on adjustment etc the manual is here.
Peter.
-
28th January 2014, 04:55 PM #4SENIOR MEMBER
- Join Date
- Dec 2007
- Location
- Gold Coast
- Age
- 63
- Posts
- 847
Yep Mine came with the smaller saw. Not sure about the dud comment though, as long as you realise the limits of the saw.
I never did much ripping with mine, mainly cross-cut and mostly 18 to 35mm stock.
They are easier to lug around is your short on space.
I think you could fit a 254mm saw if you modify/replace the table insert.
-
1st February 2014, 04:34 PM #5Member
- Join Date
- Feb 2010
- Location
- Hervey Bay, QLD
- Posts
- 89
Thanks for the replies
Cleaned up the table fairly well. Was used at owner/builder site and I think was used as just a workbench for part of its life. Nice and clean now though.
Got my saw mounted up all good. Cuts accurate to rip fence - parallel cuts. Blade is at 90degrees and I love the ease of height adjustment on the c9. So simple.
Leading edge of fence is at 90 but the rear part is just a little off. Cant seem to get it to adjust correctly will need some more work
Im running an older rip blade around 180mm at the moment. Ive orded a fine tooth 235mm blade to put in it. Slot has enough room to allow this size blade.
Already ripped up some lengths of pine and cut out some plywood drawers. Finish is good enough and will only get better with new blade.
Overall pretty happy
John
-
3rd February 2014, 02:01 PM #6Member
- Join Date
- Feb 2012
- Location
- templestowe
- Posts
- 52
50 bucks isn't a lot to part with.So is it worth it?Sure,you'll always get your money back if you sell it on.Question is for this price how many components are missing?I see you've started another post in search for parts.The overhead guard is same as wc2000 but the support post which also acts as the revving knife is specific to power saw table and its predecessor(compact table).I would not be surprised if you were also missing the mitre protractor
and captive push stick.Although this unit doesn't have the multi functions of its big brother(2000) it's a great little table for small projects and practice.
Happy Woodworking.
-
4th February 2014, 08:06 AM #7Member
- Join Date
- Feb 2010
- Location
- Hervey Bay, QLD
- Posts
- 89
Yep, not very much for the work Ive already done with it.
Has the mitre guage although I'm not sure how accurate it is. Ive never liked those things. very sloppy in the guide for it.
It has the feather stick in the guage which is handy, and also has the captive push stick which i now love.
Similar Threads
-
Which to buy ? Triton Workcentre 2000 or Triton Powered Saw Table
By Plushy in forum WOODWORK - GENERALReplies: 5Last Post: 6th May 2007, 05:58 PM -
Triton Powered Saw Table
By bamccall in forum TRITON / GMCReplies: 11Last Post: 28th February 2006, 10:53 AM