Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: Triton part required
-
23rd August 2011, 10:47 AM #1
Triton part required
G'day everyone,
I'm after a part for my Triton2000 not sure what the thing is called exactly, but it's a spring loaded pin type thingy to keep the leg snapped in place.
Anyhow I've taken a pic in the hope someone knows what the part is and if I maybe able to source one from somewhere other than Triton.
Thanks
Geoff
-
23rd August 2011 10:47 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
23rd August 2011, 06:15 PM #2GOLD MEMBER
- Join Date
- Nov 2009
- Location
- Canberra
- Posts
- 1,301
It's called a leg lock pin, part WCA245.
Certainly available from the UK, not sure about here - try Carbatec.
-
23rd August 2011, 07:06 PM #3
Thanks Chrism
-
1st September 2011, 03:39 PM #4
Also give Cheap Tools in Bairnsdale a call.
Current Specials
-
1st September 2011, 08:21 PM #5Novice
- Join Date
- Jul 2009
- Location
- Brisbane Australia
- Posts
- 10
Triton spare parts
Hi Geoff.
Best of British luck on Triton parts. I have chased all over Australia and England for 2 locking pins for my reserve Triton Mk3 bench. I ended up making a prefab out of 5/16 bolts and nuts and they work well. You get told to try Carbatec. They tell you to try Triton in the UK. They tell you the parts are out of production. i was that frustrated that i nearly threw the lot on the junk heap. Regards Don the wooden headed plumber.
-
2nd September 2011, 03:50 AM #6
Looks as if you can get one here.
Ray
-
3rd September 2011, 09:24 PM #7
garfield,
Let us know how you get on because I have a few triton parts I wouldn't mind ordering.
-
5th September 2011, 09:16 AM #8Learn from yesterday, live for today, hope for tomorrow. The important thing is not to stop questioning.
Albert Einstein
-
7th November 2011, 08:16 AM #9New Member
- Join Date
- Nov 2011
- Location
- Wellington, New Zealand
- Posts
- 2
Mark 3 locking pins
If you're after locking pins for the Mark 3, I'm making 3D printed stainless steel ones available through Shapeways. They're a bit pricey (23 Euros each plus shipping and that's at cost), but cheaper than a new workcentre.
Similar Threads
-
Triton brushes required
By 46150 in forum TRITON / GMCReplies: 1Last Post: 2nd February 2010, 05:24 PM -
Part Time Demonstrators Required
By Darren Kin in forum ANNOUNCEMENTSReplies: 44Last Post: 4th January 2009, 12:43 PM -
Cabinetmaker required. Full or part time.
By TKF in forum EMPLOYMENTReplies: 1Last Post: 2nd March 2008, 11:38 AM -
Part required to be manufactured from Delrin
By BrentonSpear in forum CNC MachinesReplies: 0Last Post: 10th February 2008, 06:01 PM