Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Triton Respirator Question
-
18th December 2010, 10:54 AM #1SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- Canberra
- Posts
- 566
Triton Respirator Question
Has anyone here got the ability to send me a picture of how the shroud connects to the back of the helmet on the respirator?
My shroud has come away from the helmet letting in a heap of dust and I have been stumped trying to secure it properly - without resorting to 100 mile and hour tape.
Craig
-
18th December 2010 10:54 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th December 2010, 02:26 PM #2
The shroud has an elasticated cord which fits into the groove around the helmet and clips around two pegs just under the ear muffs. The cord perishes and then fails to keep the shroud in position, I replaced mine with some round elastic from a sewing supplies or craft shop.
There are some not very good photos in the manual.
Hope that helps.
Graham
Growing old is much better than the alternative!
-
18th December 2010, 08:47 PM #3SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- Canberra
- Posts
- 566
Thanks!
Graham,
Thanks! The elastic has perished - that's an easy fix
Craig
Similar Threads
-
Triton Respirator
By DavidG in forum TRITON / GMCReplies: 8Last Post: 21st January 2005, 06:28 PM