Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: Triton thicknesser
-
5th July 2014, 10:27 PM #1New Member
- Join Date
- Jul 2011
- Location
- Blue Mountains
- Posts
- 3
Triton thicknesser
G'day all
I am looking for help tracking down some new knives for my Triton thickneser, does anyone have any idea where I can get some? Any help or ideas would be greatly appreciated. Thanks in advance.
-
5th July 2014 10:27 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th July 2014, 09:13 AM #2Intermediate Member
- Join Date
- Jul 2008
- Location
- Bungendore
- Posts
- 33
Parts for the older thicknessers are almost impossible to get. I purchased some from the EBay store below last year, they came packaged as GMC but were identical to Triton blades
cheaptoolsau on eBay
These guys operate from a shop power tool/auto electrical repair shop in Victoria (bairnsdale I think) which you can ring direct. Unfortunately I cannot recall their shop name however if you do a forum search on triton spares you should find them, I am sure they have been mentioned here before.
Good luck
-
6th July 2014, 07:55 PM #3New Member
- Join Date
- Jul 2011
- Location
- Blue Mountains
- Posts
- 3
Thanks Andyd, I will start tracking them down.
-
6th July 2014, 08:55 PM #4
Their shopfront used to be Bairnsdale Electrics and they were Triton warranty agents when Triton was Aussie based. The acquired most of the parts and a lot of the tools when Triton/GMC folded, and seem to have had ongoing access to Triton product since.
There are two Triton Thickies, a 13 inch and a 15 inch thicky/moulder. The 15 inch unit is available via Grizzly in US who can supply the blades, but I think they are reluctant to ship single sets to AU. You might be able to get them delivered to a US address and forwarded on however.I used to be an engineer, I'm not an engineer any more, but on the really good days I can remember when I was.
-
6th July 2014, 09:13 PM #5
Same as this model?
OnlineToolReviews.com - Triton TPT15 Thicknesser - Detailed Review
Grizzly will ship to AU, but you are looking at $110 for 1 set! ($50+ shipping).How much wood could the woodchuck chuck if the woodchuck could chuck wood?
-
7th July 2014, 10:55 AM #6
These guys seem a bit strange the way they advertise on Ebay. Sometimes they have a whole batch of items listed, and other times they have nothing. At the moment they have nothing.
I have brought the GMC blades from them which also fit the Ryobi AK13. I brought one set for myself and then a friend wanted a set. I had to wait a couple of months before they were advertised again, but at least I got them.
I found this listing on Ebay which may be of some help if they are the right ones. I am not familiar with the Triton blades.
-
8th July 2014, 09:49 AM #7Intermediate Member
- Join Date
- Jan 2014
- Location
- NSW
- Posts
- 32
This mob sells blades (assuming you have the same model) but shipping can be pricey.
Tool Spares Online. BLADE
-
8th July 2014, 09:16 PM #8SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- inverloch
- Posts
- 472
I noticed that on page 54 of the Carbitool catalogue that they will make special sizes of solid carbide planer knives. Might be worth a call to see if they can help.
CARB I TOOL Australia Pty Ltd.:. Sharpening services, Saw Blades, Router Bits
-
9th July 2014, 11:46 PM #9New Member
- Join Date
- Jul 2011
- Location
- Blue Mountains
- Posts
- 3
Thanks to everyone for all the replies. You have given me some good leads. Now comes the fun of following up those leads. Thanks again.
Similar Threads
-
Triton TPT thicknesser/ moulder
By greggyboy in forum TRITON / GMCReplies: 3Last Post: 13th July 2009, 06:20 PM -
Triton 13" thicknesser
By Woodlee in forum TRITON / GMCReplies: 8Last Post: 25th December 2008, 02:16 PM -
Triton thicknesser
By Carry Pine in forum TRITON / GMCReplies: 23Last Post: 17th August 2007, 02:25 PM -
Triton TPT15 Thicknesser/Moulder
By Dean in forum TRITON / GMCReplies: 4Last Post: 17th July 2007, 11:05 PM -
Triton Planer Thicknesser
By Mike_R in forum TRITON / GMCReplies: 5Last Post: 6th May 2006, 08:28 PM