Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
1st June 2011, 07:00 PM #1Intermediate Member
- Join Date
- Mar 2009
- Location
- Windsor
- Posts
- 30
Triton TRA001 Router Micro Adjustment Problems
Hi all,
Hope someone can help me out there. A while back I bought a Triton TRA001 Router from Bunnings. It was a demo model and came with no waranty or instructions or accessories but I bought it anyway as it was only $170.
I have it mounted in a table and have removed the large plunge spring. I only have one problem with it. The micro adjustment does not work properly. It sort of goes down but will not go up. It goes up about a mm or two and then drops down again, so this means that fine adjustment is not really posible. Does anyone out there have any ideas how I can fix this and if spare parts are available for these routers.
Thanks heaps in advance
Darren
-
1st June 2011 07:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd June 2011, 12:25 PM #2
Triton Router Height adjustment problem
Hi Darren,
Have a look at this post here by RayintheUK.
Interwood
-
2nd June 2011, 06:34 PM #3
The slippage is due to wear on the lands or grooves of the plastic worm gear. I replaced mine with the metal one mentioned. If you need help in the actual replacement process, it's available in a page I wrote a while back here. Just follow the instructions and pictures and you'll be fine (no need to dismantle the winding handle, that part was written following a request from a member here, but you need to read the section below the last picture for re-assembly tips).
HTH
Ray
Similar Threads
-
Woodpecker TLR Phenolic Plate & Triton TRA001 problems
By Waldo in forum ROUTING FORUMReplies: 14Last Post: 28th September 2008, 10:05 PM -
Adjustment problems on mof001 router
By Pheonix in forum TRITON / GMCReplies: 18Last Post: 2nd June 2008, 07:23 PM -
Problems with the Triton TRA001
By Storm in forum ROUTING FORUMReplies: 11Last Post: 21st January 2007, 09:30 AM -
Unhappy with Triton router height adjustment
By Hennie in forum TRITON / GMCReplies: 73Last Post: 3rd July 2005, 09:35 AM