Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: TSA001 and Mk3 workcentre
-
9th January 2014, 12:00 AM #1Intermediate Member
- Join Date
- Jan 2014
- Location
- NSW
- Posts
- 32
TSA001 and Mk3 workcentre
I picked up a used TSA001 and Mk3 with the upgrade saw chassis recently (haven't done any serious woodworking since high school and am looking forward to making a few things without breaking the bank initially!).
It's been a bit of a fiddle trying to true up the saw and the bench, initially I couldn't centre the saw in the top slot without removing the cams from the saw chassis and removing a bit off the stops on the saw locators to be able to locate the saw in the right spot.
Now I have an issue with the height adjuster on the saw, there is some lateral movement when the saw height is changed. My question is - is this fixable?
-
9th January 2014 12:00 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th January 2014, 04:39 PM #2Intermediate Member
- Join Date
- Jan 2014
- Location
- NSW
- Posts
- 32
Well it looks like the previous owner of the saw had dropped it, the metal housing was slightly bent where the height adjustment plate mounts onto it.
A bit of judicious force applied and all seems to be well.
Similar Threads
-
TSS001 vs TSA001
By ezzy in forum TRITON / GMCReplies: 1Last Post: 25th March 2011, 07:28 PM -
235 TSA001 Power saw
By tmh in forum TRITON / GMCReplies: 3Last Post: 27th January 2011, 09:17 AM -
Tsa001
By applied in forum TRITON / GMCReplies: 1Last Post: 13th December 2010, 09:07 PM -
TSA001 vs TA235CL
By ThreeLittleFish in forum TRITON / GMCReplies: 6Last Post: 7th April 2009, 09:41 PM