Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
-
20th May 2006, 12:27 AM #1
Mk3 upgrade clarification - saw chassis
I've got a second hand Mk3.
Now, what exactly does the saw chassis upgrade get me?
Does it allow me to go for the height winder?
How well does the stabiliser work - I got a 235mm Hitachi with the bench. Is it worth it?
Have
-
20th May 2006 12:27 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
20th May 2006, 12:41 AM #2Originally Posted by havenoideaatall
I would strongly recommend the saw stabiliser bracket, if the weight of your saw motor causes the saw to sag. ie pulls the blade out of perpendicular. Since adding the bracket, I can now reliably get my blade perpendicular. Does make it a bit awkward to angle the blade, but the benefit out ways any inconvenience.Chris
========================================
Life isn't always fair
....................but it's better than the alternative.
-
21st May 2006, 10:41 PM #3Originally Posted by chrisb691
There is lots of stuff in here but noone seems to get completely specific with the usability side of thing. To further confusion, I had the impression that the Triton saw had special cams for perfect alignment - now I read that the Mk3 does not work so well with it - why is this?(!)
have
-
21st May 2006, 11:14 PM #4
To completely upgrade your old chassis to the latest model fitted to the Bunnings type workcentres (fitted with a height winder) you need...
1x chassis upgrade kit
and
1x height winder kit
Option for improved accuracy is to ALSO add a saw stabiliser bracket to help with the problems of saw slump (where the weight of the motor when hanging upside down from the workcentre chassis - causes the motor to pull the saw blade over and off plumb)
If your Hitachi saw is a C9 - they are a good unit, and from my expiriences did not suffer as badly from saw slump as say a similar sized Makita.
The difference between and old chassis and new chassis is the old chassis was a grey, cast alloy, 2 piece angle section, that only supported the saw at the very front and rear of the saw base plate. The new chassis is a Grey (or sometimes orange) powdercoated, 2 piece, pressed solid steel plate that supports the saw more central and evenly, and of course allows for the fittment of the height winder.
The alignment cams will ONLY work with the Triton 9 1/4" Saw - and only on the new style chassis.
Dohboy
-
22nd May 2006, 09:53 AM #5Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
Originally Posted by dohboy
I upgraded the saw chassis to the new style to allow me the use of a height winder, and that is the only reason to upgrade the chassis as you can already fit a saw stabiliser bracket to the old one, and then later I got the Triton 9 1/4 saw.
Whilst the alignment cams will fit the saw chassis the are in the wrong place for use with the MK3 table top for the fence ruler scales to be accurate.
So you will still have to use the old fittings.
Peter.
-
22nd May 2006, 10:36 AM #6Originally Posted by dohboy
cheers
-
22nd May 2006, 07:00 PM #7
Sturdee,
Many apologies, I stand corrected....the first line does indeed say Mk3
I thought all of those were in museums by now - or happily resting under RTA300's after the owners had traded in the tabletops.
havenoideaatall,
Ditch the alignment cams idea...I was never a huge fan of them anyway.
Im glad we could answer you questions.
Dohboy.
-
22nd May 2006, 10:42 PM #8
Still think the alignment cams should have been ditched in favour of a threaded system (horizontal) allowing accurate, precise alignment.
"Clear, Ease Springs"
www.Stu's Shed.com
-
24th March 2020, 01:16 AM #9New Member
- Join Date
- Mar 2020
- Location
- Frenchs Forest
- Age
- 48
- Posts
- 4
Hi, newbie here.
Do you have anymore info regarding this upgrade?
Sent from my SM-G960F using Tapatalk
-
24th March 2020, 09:46 AM #10Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
-
23rd June 2020, 09:05 PM #11Novice
- Join Date
- Jun 2020
- Location
- Brisbane
- Age
- 69
- Posts
- 17
Hi Newbie
I have just acquired a Triton 235mm saw to fit into the WCA400 upgrade saw frame (with the winding attachment fitted). I now have both the 2000 and MK3 New Series workcentres. If you still need the information, I can try and fit the WCA400/Triton saw into the MK3 and report back.
Similar Threads
-
how to fit Makita 9 3/4" saw to MK3 Triton?
By darley in forum TRITON / GMCReplies: 5Last Post: 8th October 2005, 05:06 PM -
Computer...upgrade or new ?????
By macca2 in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 61Last Post: 17th December 2004, 05:47 PM -
Height Winder Installation Mk3
By Ian Rough in forum TRITON / GMCReplies: 3Last Post: 19th February 2004, 02:47 PM -
Table saw upgrade
By poimen in forum TABLE SAWS & COMBINATIONSReplies: 1Last Post: 6th August 2003, 10:53 AM