Thread: Wanted: 3 Titan's

John, so 3 more Titan Firmers? I'll keep an eye out for you.

Originally Posted by johnredl

I'm after: 1/4", 1/2" and 1" (and maybe a "bigger than 1" size also) non-beveled edge, not sockets, titans at reasonable prices.

Can anyone help? I know I can go to eBay, but at least via this forum I know what I'm getting.

John

Hi John,
are you after Titans with original handles?
SG

Originally Posted by Scribbly Gum

Hi John,
are you after Titans with original handles?
SG

Not really fussed. I'm waiting on my new harold and Saxons, and my current corner hardware chisels are giving me the poos

John,

i can help with at least a 1/4", perhaps others. Ill check the doubles pile.

Send me a message Fri if I haven't contacted you.

Nick

Originally Posted by johnredl

I'm after: 1/4", 1/2" and 1" (and maybe a "bigger than 1" size also) non-beveled edge, not sockets, titans at reasonable prices.

Can anyone help? I know I can go to eBay, but at least via this forum I know what I'm getting.

John

Are you after "heavy tangs" (Registered handle) or "light tangs" (Wood or Swedish pattern handle)???

This is my current collection (not including the 3 corner hardware chisels)...a 3/4 and a 3/8. I'm not a collector, or a chisel purist. My new Harold and Saxons are going to be bevel edged, that's why I'm after straight edges, and I wasn't after sockets as the 2 that I have aren't. Apart from that I don't really care all that much. Thanks again
ImageUploadedByTapatalk 21365590919.478591.jpg

Originally Posted by johnredl

This is my current collection (not including the 3 corner hardware chisels)...a 3/4 and a 3/8. I'm not a collector, or a chisel purist. My new Harold and Saxons are going to be bevel edged, that's why I'm after straight edges, and I wasn't after sockets as the 2 that I have aren't. Apart from that I don't really care all that much. Thanks again
ImageUploadedByTapatalk 21365590919.478591.jpg

Did you get the chisels ?? If not I can do the sizes you want in heavy tang with mixed blade stamps (eras), original handles (but no decals) for $15 each plus postage. PM me if interested.

Originally Posted by Doggie

Did you get the chisels ?? If not I can do the sizes you want in heavy tang with mixed blade stamps (eras), original handles (but no decals) for $15 each plus postage. PM me if interested.

Ill send u a pm

Originally Posted by johnredl

Ill send u a pm

I think we're supposed to open forum this stuff except for addresses and quotes.

In answer to your pm I have disposable spares in all sizes in Hvy tang except 1/8th, 1 3/4 and 2 inch. All with original Titan handles, in good nick. I keep all decals and very hard to get sizes (as above) for my collection. All chisels very clean but not sharpened to secondary bevel otherwise I would cut myself to bits when handling. If you want 3/8th, 5/8th and 7/8ths I'll have to charge a bit more (extra $5).

Originally Posted by Doggie

I think we're supposed to open forum this stuff except for addresses and quotes.

In answer to your pm I have disposable spares in all sizes in Hvy tang except 1/8th, 1 3/4 and 2 inch. All with original Titan handles, in good nick. I keep all decals and very hard to get sizes (as above) for my collection. All chisels very clean but not sharpened to secondary bevel otherwise I would cut myself to bits when handling. If you want 3/8th, 5/8th and 7/8ths I'll have to charge a bit more (extra $5).

From what I've read, Titan firmer non-bevel wooden handle came in 12 sizes: 1/8" 1/4" 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1 1/4" 1 1/2" 1 3/4" 2".

You don't have 3, and I have a shiny 3/4. When you say clean, I'm assuming that they look like the 3/4" in the photo that I posted. If that is the case (naturally like all tools you buy, they need sharpening to your own specs), I'm interested all except the 3/4". Is there any chance you could post a pic before I post a definite "I'll take it"? I've got another member I need to get back to regarding his offer.

Originally Posted by johnredl

From what I've read, Titan firmer non-bevel wooden handle came in 12 sizes: 1/8" 1/4" 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1 1/4" 1 1/2" 1 3/4" 2".

You don't have 3, and I have a shiny 3/4. When you say clean, I'm assuming that they look like the 3/4" in the photo that I posted. If that is the case (naturally like all tools you buy, they need sharpening to your own specs), I'm interested all except the 3/4". Is there any chance you could post a pic before I post a definite "I'll take it"? I've got another member I need to get back to regarding his offer.

Will do.

Originally Posted by Doggie

Will do.

As requested. Quarter inch through to 1 1/2 inch minus 3/4 inch which you have. Handle of 1 1/2 inch OK but cosmetically a bit ratty unfortunately.

Originally Posted by Doggie

As requested. Quarter inch through to 1 1/2 inch minus 3/4 inch which you have. Handle of 1 1/2 inch OK but cosmetically a bit ratty unfortunately.

Not much to say except I'll take them! I'll pm you details.

FYI. Here is my new chisel set, inside the new leather tool roll that I made tonight, using plans that I saw on the fine woodworking website.

Now to spend hours sharpening...