Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: And again the other way
-
28th September 2009, 07:43 PM #1
And again the other way
Hi,
I cant help myself when it comes to the rust hunt. It is habit forming. When I saw this plane I thought there must be a few times when that will be handy. It is a Stanley 130 double ended block plane. The blade can be mounted the other way round for bullnose work. It is in good condition and all I had to do was clean off some surface rust and grind and sharpen the blade.
I tried it on a bit of blackbutt and it works well. Has more heft than a regular block plane but is really a bit big to be a block. It's almost the size of a No3. I am sure it will get some work when I get used to it.
If anyone has any other info on them let me know.
Regards
John
-
28th September 2009 07:43 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th September 2009, 09:49 PM #2Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Interesting little beast. Bet the extra heft comes in handy for tougher grain.
-
29th September 2009, 12:25 AM #3Senior Member
- Join Date
- Jan 2009
- Location
- The Shire
- Posts
- 325
I love my 130. It's a great little plane. No bells or whistles but when sharpened up it's a cracker. Until I bought an old 60 1/2 recently it was my go-to small plane.
Use it in good health!
Cheerio,
Virg.
-
29th September 2009, 10:07 AM #4
I've got one too, and find it a very handy little thing. The blade adjustment (or lack thereof) can be a pain setting up, especially when swapping the blade over. I often take it with me, on-site.
CheersAndy Mac
Change is inevitable, growth is optional.
-
29th September 2009, 11:11 PM #5
Hi,
Well so there are a few others about. It is the first time I have seen one.
I do think it is a practical little plane and it will get a fair bit of use. As for blade adjustment I use the same approach as for wooden planes. Tap with a small mallet. Slack off the screw a bit and tap the front to extend and the back to retract. A few minutes practice is all it takes. I have noticed with the wooden planes that each one has a different feel when setting the blade but when you get the feel of that plane then you sort of tap it into place without thinking.
Regards
John