Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Bow or Buck saw
-
29th October 2005, 06:44 PM #1
Bow or Buck saw
Looking around on the net at bow saws I see the yanks also have a version where the handle is one end frame that extends vertically below the blade.
I expect this design is easier to control than the saw with 2 horizontal handles.
Any comments from the darkside?
-
29th October 2005 06:44 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th October 2005, 06:55 PM #2
Bob
When I use my bowsaw, I hold both the (horizontal) handle AND the (vertical) frame alongside it.
Regards from Perth
Derek
-
29th October 2005, 07:35 PM #3
From my recent research on bow saws, all the users hold the saw by the vertical member, not the handles.
Makes you wonder what the handles are for? To qualify, I've only had an interest in the 24" size, may be different for smaller modelsBodgy
"Is it not enough simply to be able to appreciate the beauty of the garden without it being necessary to believe that there are faeries at the bottom of it? " Douglas Adams
-
29th October 2005, 08:01 PM #4
I always steady with my left hand on the far frame member, and right hand on the closest turned handle. Somehow I reckon the trad handles allow for the saw to be turned for clearance etc, and comes quite natural. Like a gents saw, maybe the position locks the wrist for more fine control? Just surmising...?
I think I'd have to try the bucksaw and compare. Whats Ryan got to say on this US flavoured tool?
Cheers,Andy Mac
Change is inevitable, growth is optional.
-
29th October 2005, 10:05 PM #5Originally Posted by Andy Mac
OK these are professionals, but I can't imagine anyone doing this so quickly and accurately with any other saw.
So much to learn, so litle time.Bodgy
"Is it not enough simply to be able to appreciate the beauty of the garden without it being necessary to believe that there are faeries at the bottom of it? " Douglas Adams
Similar Threads
-
Bow Saw
By Intarsiaman in forum INTARSIAReplies: 3Last Post: 2nd November 2004, 11:41 AM -
Bow Saws
By Strungout in forum HAND TOOLS - UNPOWEREDReplies: 5Last Post: 30th June 2004, 08:44 AM -
How do I remove a 3mm bow out of a finished 65x32 Jarrah member ?
By youvee in forum WOODWORK - GENERALReplies: 8Last Post: 8th June 2004, 04:04 AM -
bow saws
By violincrafter in forum HAND TOOLS - POWEREDReplies: 4Last Post: 22nd March 2004, 07:13 PM