Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Brass lacquer
-
11th December 2012, 04:07 PM #1
Brass lacquer
I'm restoring a marking gauge that I made a few years ago. It has some brass inserts that have tarnished over time, and the varnish job was not the best. I've sanded it all back and used Danish Oil finish, which looks and feels so much nicer than PU varnish.
Now I'm wondering what to do with the brass insert bits to protect them and keep them shiny. I have various wood finishes, Polyurethane varnish (Feast Watson), Wattyl Stylwood Nitro lacquer, Danish Oil, paste wax, etc.
Will any of these do a decent job of protecting the brass from tarnish, or do I need to get a specific brass lacquer?Good things come to those who wait, and sail right past those who don't reach out and grab them.
-
11th December 2012 04:07 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
12th December 2012, 08:22 AM #2
SD, I'm not sure how you can keep any working tool in mint condition. Shellac or lacquer will certainly protect the bits not subjected to heavy constant abrasion like the thumb screws or decorative inserts. I wouldn't use anything that gives a thick coating like polyurethane - it would look a bit tacky & always seems to peel after a while. The brass bits that are positioned for wear resistance are a big problem, because they are going to be rubbed against wood, & any surface treatment will very soon be rubbed off. Use keeps the wear surfaces clean where they contact the work, but also causes fine scratches, so it's a bit of a losing battle, I think.
Nice shiny brass on a brand-new tool looks very spiffy, and is something I like to see, but I'm also resigned to seeing the brass age gracefully, along with the rest of the tool, so it's not something I get too fussed about, myself. Maybe it's because I've reached the age where it's long past pretending I'm as good as new, & promoting the idea that a bit of patina and a few dings are interersting!
Cheers,IW
-
12th December 2012, 08:36 AM #3
Hiya
IanW is correct
You can polish the brass but it will tarnish over time.
The only real option to keep it shiny and yellow is to gold plate it - but this will wear off on constant use.
Alternatively you could change it to nickel plate, slightly harder and will last a heap longer - but if the change in colour offends.....
Any plastic coating will will look decidedly tacky after a very short while.
I suggest you clean it up and use it. Then after a few more years of constant use - use can go through the process again and be sure to take the time to remember with pride the original build and work completed.
Maintaining tools is part of the pleasure - if we do it right with the right attitude.
-
12th December 2012, 08:50 AM #4
Incralac is the spray lacquer for all brass and copper.
I think it's a Wattyl product, a can lasts for years. (If you don't use it all)
Cheers
Steve
-
12th December 2012, 09:55 AM #5
Do you think a good coat of paste wax will delay the tarnish somewhat?
Good things come to those who wait, and sail right past those who don't reach out and grab them.
Similar Threads
-
what rods for thin brass to brass ??
By Mathuranatha in forum WELDINGReplies: 3Last Post: 6th May 2009, 01:06 AM -
Old Lacquer
By Ed Tabachek in forum FINISHINGReplies: 0Last Post: 17th November 2004, 04:48 PM