Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 136 to 150 of 1881
-
13th December 2008, 01:48 PM #136
You got it Ray.
Plough plane makers have fingerprints like saw makers And that one is a Preston screw-arm fillister, not a Mathieson plane like the rest.
There are 4 matched pairs of planes, fillisters and ploughs. Well ALMOST matched.
Each pair have the same configuration, so to see an odd bod, look for the sticking out ears.
3 pairs match nicely, one pair don't, the finials on the Preston plane are different to the 3 other planes with screw-arms. Also the Preston knobs are very different, much less bulbous, and the bulbous part isn't the largest diameter like it is on the other 3 planes with screw arms, which are in the traditional Mathieson pattern.
The finials were clear in the first picture, and only the knobs on those two planes could be seen as different. I thought it a little too subtle, so took another pic with the knobs on the other 2 screw-arm planes clear to see.
Regards,
Peter,
-
13th December 2008 01:48 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th December 2008, 02:57 PM #137
Now that you point it out, comparing the shape of the finials, makes it seem obvious.
Regards
Ray
-
13th December 2008, 11:57 PM #138
I feel guilty, about having two goes.. so this one is easier.. No clues.
After Peter's magnificient planes, I figure it's time for some saws....
Regards
Ray
-
14th December 2008, 08:42 AM #139
Beautiful saws Ray.
You're right - this one's easy.
The fourth one along is filed rip while the rest are filed cross-cut.
Heh, Heh, Heh.................
Seriously, I don't know, but I have tried to read the makers and can't quite, and I don't know enough to distinguish them from their appearance alone.
Numbers 3, 4 and 5 do have gorgeous handles.
SG.... some old things are lovely
Warm still with the life of forgotten men who made them ........................D.H. Lawrence
https://thevillagewoodworker.blogspot.com/
-
14th December 2008, 05:07 PM #140
Ok, maybe it's not as easy as all that.... Time for a clue.
The Makers are, from left to right
1. Bowden & Co
2. Taylor
3. Thos Tyzack
4. R Groves & Sons
5. Taylor Brothers
6. Mathieson
7. Thos Turner & Co
8. Robert Sorby
Hope that helps...
Regards
Ray
-
14th December 2008, 06:52 PM #141
Taylor was related to Thomas Turner by marriage of his second cousin Ursula to Thomas' son Robert. Ursula had had a tryst with Robert Groves some 6 years earlier. She was most partial to the name Robert and through this brief liaison was born a daughter. Her great uncle T.Mathieson from Glasgow meanwhile had once had dinner with one of the Taylor boys who had worked for Robert Sorby. All of these people lived in England. Bowden was from America.
prozac
____________________________________________
Woodworkforums, cheaper than therapy...........
-
14th December 2008, 07:18 PM #142
Wow, I think that this is going to be my all time favourite thread. I get to look at pictures of wonderful tools and get lots of info to.
You folks rock.
Kevin
-
14th December 2008, 07:19 PM #143
Hey Prozac,
LOL..
Very close.... but it was Alex Mathieson from Glasgow, not Great Uncle Tobias Mathieson... (and that was a clue..)
And Bowden was not from America, and he was related to Joe Tyzack from Sheffield.
Regards
Ray
-
14th December 2008, 07:37 PM #144
too big a clue ray. they are all sheffield based companies bar the mathieson.
I would never have picked it up from the photo though.
what is your fav of the lot in that photo?.. the Tyzack looks pretty dreamy from here
-
14th December 2008, 09:06 PM #145
Bing Bing Bing,
We have a winner, I should have kept the clues a bit more cryptic.
Yes Mathieson is the only one not made by a Sheffield maker. This is of course a reversal
of Peter's puzzle..
Ok, Slow6 you're up..
Regards
Ray
PS I like the Richard Groves, The Thomas Tyzack is sweet little saw as well.
-
14th December 2008, 10:26 PM #146
Just had to take a stab at it Ray. I thought it had to do with one of them not being local...but which one. Knew all except for Bowden who I couldn't find any info on, so he was my choice. I'll have to be more studious next time.
prozac
____________________________________________
Woodworkforums, cheaper than therapy...........
-
14th December 2008, 11:57 PM #147
As it happens you were on the right track, Bowden & Co, was one of those secondary product lines made by Joseph Tyzack and Sons, 1895-1914. I only included it so that there would be more than one steel backed saw.
You almost had it!
Let's see what mischief Slow6 can devise...
Regards
Ray
PS It is of course entirely possible that Mathieson had their saws made for them by someone in Sheffield, but they are primarily known as a Glascow based firm...
-
16th December 2008, 07:31 PM #148
*** BUMP ***
Hi Slow6, time to dust off that camera. You're on.
Regards
Ray
-
16th December 2008, 07:42 PM #149
-
16th December 2008, 08:58 PM #150
hello folks
I was planning something downright nasty but I got lost building a bench (well starting to build a bench) so here's a quickie before the light is completely gone for the day.
I'll be very surprised if this one sees out the hour.
who doesn't belong?Best regards, Luban
Similar Threads
-
Not exactly a hand tool.
By BobL in forum HAND TOOLS - UNPOWEREDReplies: 7Last Post: 26th October 2007, 01:50 AM -
Hand tool set
By RyanUSA in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 18th September 2006, 09:55 AM -
Second hand Hand Tool Sale - Sydney - on tomorrow 13 Aug
By eddie the eagle in forum WOODWORK - GENERALReplies: 2Last Post: 16th August 2006, 12:51 AM -
Latest hand tool.
By BobL in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 14Last Post: 22nd July 2006, 10:41 AM -
Hand Tool Preservation Society Tool Sale
By Clinton in forum ANNOUNCEMENTSReplies: 0Last Post: 15th July 2005, 01:47 PM