Needs Pictures: 0
Results 1 to 9 of 9
Thread: Depth stop
-
9th July 2023, 05:17 PM #1GOLD MEMBER
- Join Date
- Oct 2018
- Location
- Dandenong Ranges
- Posts
- 1,942
Depth stop
Hi all. I recently picked up a Record 040 plough plane. It was missing the depth stop and "original" screws. I thought I could make a depth stop, and it turns out that I can. Inspired by fellow forumites and even purchasing some items here, too, I was able to get this plane up and running on a rainy Sunday afternoon. Shaft is made from a 6" bullet head nail, threaded with my 12 20 die, peened into a hole tapped with my corresponding tap into some scrap brass plate and cleaned up on my Uncle's linisher.
For many here, this may be a minor achievement, but any time I am cutting threads and tapping holes, I am well out of my comfort zone. I make sawdust every day, not swarf! And when it works, a small part of my is still surprised. Another small part is glad that I have finally used that tap and die!!
Sent from my SM-G986B using Tapatalk
-
9th July 2023 05:17 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th July 2023, 06:09 PM #2Senior Member
- Join Date
- Sep 2012
- Location
- Jersey CI
- Posts
- 215
Depth Stop
Hi,
How many cutting irons does your
Record 040 have. In the book on planes
I have it shows 3 ?
Martin.
-
9th July 2023, 08:00 PM #3
Well done. I also recently picked up a Record 043. Mine is missing a few more bits.
I found it in a second hand shop. They clearly did not know what it was. [emoji3]
However, I believe it will not be too hard to make a new lever cap and I still have some 1085 to make a couple of blades.
For the depth stop I don't have to think how to do it. Thanks to you [emoji6]
Sent from my SM-G781B using Tapatalk
-
9th July 2023, 10:14 PM #4GOLD MEMBER
- Join Date
- Oct 2018
- Location
- Dandenong Ranges
- Posts
- 1,942
Hi Martin and CK. Yes, it came with the 3 blades. The smallest one was used to make the groove in the timber that it's resting on. The lever cap is a shaped chunk of metal with a threaded boss at one end. I can take more photos if you need, I believe they both planes have the same sort.
Sent from my SM-G986B using Tapatalk
-
10th July 2023, 10:23 AM #5
Well-done, MA, we'll have you making innfills before long!
One of the messages I constantly push is that working with metal is not that much different from working with wood - the tools like saws & rasps (files) do the same things, they just have to be a bit tougher & finer & consequently, things go at a somewhat slower pace. That's not always a bad thing - you can (sometimes) see the disasters coming & take evasive action.
And metal does have that wonderful property of malleability - you can't peen wood to make a tight, seamless joint...
Cheers,IW
-
10th July 2023, 12:33 PM #6
MA,
Well done I’ve said this a few times Metal is really just very very hard wood,I know that sounds cocky, but in a lot of ways the tools are similar, an metal does behave in some ways similar too wood,you can cut it chisels it drill it bend scrap it !!
(Weld it but let’s leave that for later, or call that glueing it).
As Ian said you’ll be doing a Full Body metal plane in no time, We know you want too.[emoji41]
Just keep at it,
-
10th July 2023, 08:11 PM #7GOLD MEMBER
- Join Date
- Oct 2018
- Location
- Dandenong Ranges
- Posts
- 1,942
Thanks Ian and Matt. Alright, I will have to give it a go, definitely, someday, soonish.
-
10th July 2023, 09:33 PM #8
-
11th July 2023, 10:08 AM #9
Just needling, MA, just needling....
I reckon if you get into infills & the planes of the late 19th C you'll be a lost cause in no time, so maybe they should wait 'til you have the time to indulge in wherever it takes you. I didn't make many planes before I retired & I have no doubt whatever, based on what you've done so far, that you'll be well ahead of me once you get going seriously!
It doesn't take long before you branch out into stuff you don't really need but catches your interest for one reason or another, and there's so much stuff online now. I've been reading up on the history of metal planes these last few days & there's some fascinating planes from centuries back that would make a very interesting project. But I'm not making any more planes......
For the moment, I'm just enjoying using what I've got. I'm actually making some pieces of furniture atm, for the first time in ages. LOML decided she wanted a new desk to replace the ugly utilitarian veneered particle board thing she got when they were throwing out stuff from her old workplace (the only appeal was its enormous size). Unfortunately, the design she chose is very simple - what I'd call "California round-over style" from the 70s, so not a big challenge in preparing the parts but the wood I used needed lots of hand-planing. My two work-horse Stanleys did most of the grunt work, but my small infill smoother took over the final finishing. It's so nice to use I was tempted to just go on planing 'til there was nothing left...
Finish all your other projects before you start buying in brass...
CheersIW
Similar Threads
-
Depth stop for a Carter 54
By Chief Tiff in forum HAND TOOLS - UNPOWEREDReplies: 6Last Post: 17th June 2016, 08:09 PM -
Back Saw + depth stop
By pmcgee in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 23rd March 2016, 04:21 PM -
Depth-Stop for Elu Mitre-Saw...
By Batpig in forum METALWORK FORUMReplies: 0Last Post: 28th May 2009, 09:38 PM -
trouble with depth stop
By bobbyfmax in forum WOODWORK - GENERALReplies: 10Last Post: 23rd September 2008, 04:30 PM -
Depth Stop for SCMS
By John G in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 12Last Post: 19th February 2004, 09:08 AM