Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Enlarging holes in saw plate?
-
7th January 2013, 08:59 PM #1Rank Beginner
- Join Date
- Jun 2011
- Location
- Melbourne
- Posts
- 484
Enlarging holes in saw plate?
I have some nice brass LV Chicago bolts to replace a bunch of mangled sawnuts in an old Spear and Jackson I'm restoring.
They fit nicely in all dimensions, except that they are a little too large to thread through the holes in the saw plate.
How can I enlarge the holes in the saw plate without damage? Using a diamond file would be inaccurate and take an age.Cheers,
Eddie
-
7th January 2013 08:59 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th January 2013, 09:13 PM #2
Hi Snaf.
I put a new handle on a 4ppi thumbhole ripsaw, which I rambled on about on here.
A rat-tail file was good for enlarging a hole in one direction ... a bit like a hand-held nibbler
I had issues trying to make a new hole with what I have on hand. A (cheap awful) masonry bit did an excellent job, once there was a tiny hole through the plate for it to enlarge. I suspect one should work easily to enlarge an existing hole.
Cheers,
Paul
-
8th January 2013, 01:17 AM #3Member
- Join Date
- Mar 2012
- Location
- Doe Run, Pennsylvania
- Posts
- 91
I use a chainsaw file. Don't worry about extreme accuracy. You want a little bit of play in the hole, anyways, so that there is room for some expansion and contraction of the wood. The handle is largely held onto the plate by friction, not the fit of the bolts in the holes.
-
8th January 2013, 08:08 AM #4Jim
- Join Date
- Feb 2008
- Location
- Victoria
- Posts
- 3,191
Like Isaac I have used a chainsaw file.
Cheers,
Jim
-
8th January 2013, 08:24 AM #5Member
- Join Date
- Nov 2007
- Location
- inner city sydney
- Age
- 55
- Posts
- 76
stepdrill.jpg
These are $10.99 inc postage on fleabay- may be worth a shot...
-
8th January 2013, 10:03 AM #6
A masonary bit was a good idea born of necessity, Paul. You can buy accurately-sized multi-purpose carbide-tipped 'builders' drills'. I keep forgetting the brand, but they are available in most hardware stores. Not cheap, but useful for all sorts of jobs. Don't use any cutting fluid - they don't like that, & cut through saw plate perfectly well dry - I use them a lot in my saw making. You can pursuade a regular HSS bit to cut through saw plate, but they don't like it at all, & it will need major surgery after 3 or 4 holes.
As others have said - a chainsaw file will do the job quite well. It doesn't have to be deadly accurate (many old saws have over-large holes), but if you're lucky, you can find a file that is just the right diameter & 'screw' it through the hole like a reamer, which will preserve the concentricity of the existing hole...
Cheers,IW
-
8th January 2013, 01:08 PM #7.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,837
I use a round file but if you want a more accurate fit, a dremel or battery powered drill and a conical stone will do this quite easily. Tackle from both sides to get a more even shaped hole.
-
8th January 2013, 01:19 PM #8
It *was* a chainsaw file I used rather than a rat-tail file as such.
I remember going to get the "Stihl" drawstring bag.
The masonry bit was a tip either from you Ian or you Bob.
Similar Threads
-
Cutting Irregular holes in 2mm Checker-plate
By zuffen in forum TRAILERS & OTHER FABRICATED STUFFReplies: 12Last Post: 15th March 2013, 06:16 PM -
Enlarging a 54mm hole in plywood
By Dengue in forum WOODWORK - GENERALReplies: 10Last Post: 18th August 2011, 04:52 PM -
Enlarging the axle hole on Fork Leg
By Sterob in forum METALWORK FORUMReplies: 5Last Post: 7th March 2011, 05:07 AM -
Enlarging existing hole - any tips?
By Karsten in forum BOAT BUILDING / REPAIRINGReplies: 6Last Post: 9th February 2011, 06:13 PM -
F Holes
By Malibu in forum MUSICAL INSTRUMENTSReplies: 3Last Post: 2nd January 2007, 08:42 AM