Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Flattening Clifton #5
-
1st August 2012, 06:52 AM #1
Flattening Clifton #5
https://www.woodworkforums.com/f65/sc...ml#post1528580
Reply re the necessity for plane blade, or even frog, to be in place when flattening the base.
Ueee scraped the base flat to an exacting degree - without the frog, and found no deformation once reassembled.
Cheers,
Paul
-
1st August 2012 06:52 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
1st August 2012, 07:24 AM #2
It's like boring cylinders in an engine with Torque Plates bolted on it. You do it just in case it changes dimensionally with everything torqued in place.
Toby
-
1st August 2012, 08:36 AM #3
I always scrape planes with the frog in as I noted a small change in the spotting on at least one I did. They were all Stanley and the match may not have been perfect between frog and body. Clifton are very well machined however. I guess it doesn't really matter as long as you spot after the frog is back in to see what's happened. I never saw any change in the spotting with or without blade so it is not important to have it in.
-
2nd August 2012, 01:46 PM #4
I'm pretty sure up and down on some 80 grit is as far as many people want to go.
Paul
Similar Threads
-
Clifton Planes
By cadas in forum HAND TOOLS - UNPOWEREDReplies: 2Last Post: 17th April 2012, 12:14 PM -
Clifton cap iron
By IanW in forum HAND TOOLS - UNPOWEREDReplies: 19Last Post: 17th May 2005, 07:50 AM -
Clifton 3 in 1 or not?
By outback in forum HAND TOOLS - UNPOWEREDReplies: 17Last Post: 30th April 2004, 01:35 AM