Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: My first homemade plane
-
23rd March 2012, 11:31 PM #1Member
- Join Date
- Aug 2007
- Location
- Brisbane
- Posts
- 53
My first homemade plane
I have reached the pubescent stage in my plane-making life, having just made my first woodie. I had to cheat and use the lamination method when my attempt to chisel it out from the solid failed. It could do with a better finish. So far it has had one quick coat of linseed oil.
Attachment 202458Attachment 202459
I tried to think up a more elegant shape but in its present form it is quite comfortable to hold. My original aim was to make a plane that could be used one handed and it seems to satisfy that.
This raises the question of plane ergonomics. With this plane, the back part of the palm pushes on the rump of the plane. Using a plane with a tote, I find that I am pushing with the part between the thumb and index finger which is tolerable but not ideal. A higher bench would make a difference but mine is already quite high.
Cheers, Tony
-
23rd March 2012 11:31 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
24th March 2012, 09:35 AM #2
Tony,
It looks like it takes a nice shaving and I like the shape.
What wood is it?
Regards
-
24th March 2012, 02:44 PM #3Member
- Join Date
- Aug 2007
- Location
- Brisbane
- Posts
- 53
-
24th March 2012, 02:46 PM #4
Well done on your first wooden plane.
-
24th March 2012, 10:38 PM #5
Re: My first homemade plane
Nicely done, Tony! Looks great!
-
25th March 2012, 10:10 AM #6
Hi Tony - that went together nicely.
I guess shape is very much a matter of individual choice, and it does not necessarily improve or detract much from comfort in use. If it feels ok as-is, just leave it there, perhaps. You can't do much shaping of the sides because of the laminated construction, so a 'coffin' shape is out. If you think the block shape is too boring, perhaps you could cut down the back a bit to make a 'coupe'?
Of the two small (38mm wide blade) planes I've made in the last couple of years, both are user-friendly, and both can be used one-handed easily. I think the little Ironwood coffin smoother is the nicer of the two to use - it just fits in my hand in a most comfortable way. The brass-sided plane might score better on appearance, & looks like it might be better to hold onto, but somewhat to my surprise, it isn't....
Cheers,IW
-
26th March 2012, 12:30 AM #7Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,357
Hi Tony. Thats a fantastic result for your 1st hand plane build. I love the way you have managed to keep the mouth nice and tight in front of the blade. Keep up the good work. Those prepared to try their hand are too few and hard to find.
Stewie.
-
26th March 2012, 12:34 AM #8Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,357
Hi Ian. I can see another slippery slope you might fall straight into. Backsaws now hand plane builds. You continually surprise me with your prowess.
Stewie.
-
26th March 2012, 08:39 AM #9
Stewie - thanks for the compliment, but I don't think I will be challenging HNT any time soon!
I've actually made quite a few planes over the years, and they have not all been successful. My first try was a real dog that I never did get to work very well, but the mistakes I made taught me a few things about plane construction. So I'm impressed when I see someone turn out what looks like a fine little user on their first try....
Cheers,IW
-
26th March 2012, 02:08 PM #10
-
26th March 2012, 04:28 PM #11
Certainly not nail-files, Paul, just excessively thick blades.
I cut them from a chunk of 1.5 x 0.25 inch, ground HSS, which was an impulse buy from McJing's at a TWWW show some years back. I would have preferred3/16" but he didn't have anything less than 1/4" thick in that width, on the day. I cut it with a plasma cutter, & as you might imagine, it took some time to grind the bevels. At least the backs were very flat, & only needed a bit of a polish, thank goodness.
The steel is certainly hard, probably too hard, and it's the sort of HSS that has a fairly coarse grain structure. I hone a good edge on them, but they don't leave as glossy a surface as some of my other blades. Part of the reason for that, too, is the high bed angle, particularly on the brass-sided job.
The woodie is a nice little plane, but it has a nasty quirk. When I tap the end to loosen the wedge, the blade sometimes falls out. Bad enough over the bench, but I would definitely not like that chunk of steel hitting my foot edge-first!
I better leave a note in my toolbox, warning whoever inherits it to be very careful.....
Cheers,IW
Similar Threads
-
Homemade dovetail jig
By geralon in forum ROUTER JIGSReplies: 3Last Post: 31st October 2011, 05:40 PM -
Homemade Plane Blades from M2 HSS for Wooden Planes
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 351Last Post: 27th July 2009, 04:52 PM -
My Homemade cnc
By simso in forum CNC MachinesReplies: 18Last Post: 25th October 2008, 03:58 PM -
homemade lathes
By BernieP in forum WOODTURNING - GENERALReplies: 12Last Post: 2nd October 2008, 10:07 AM -
homemade shoulder plane
By aryq in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 4Last Post: 23rd October 2006, 05:59 PM