Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: hybrid plane
-
13th May 2011, 06:34 PM #1Intermediate Member
- Join Date
- Mar 2009
- Location
- caloundra
- Posts
- 40
hybrid plane
A friend gave me an old Mathieson wooden plane last year so I sharpened it and I use it occasionally. I was on the go with it today and thought how well it worked. It has a Mathieson and Son backing iron but a Stiletto brand blade. A web search tells me the Stiletto tool Co started in Sacramento US in 1848 and still makes tools today. Can any one tell me if Stiletto made complete planes or only blades?
Barry
-
13th May 2011 06:34 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th May 2011, 04:18 PM #2I would eat wood if I could.
- Join Date
- Apr 2011
- Location
- Morwell Victoria Australia
- Age
- 65
- Posts
- 29
Stiletto tool Co
You can find the Stiletto tool Co, at Stiletto Tools . I think they seem to stock what they term, striking and struck tools.
-
19th May 2011, 09:07 PM #3Intermediate Member
- Join Date
- Mar 2009
- Location
- caloundra
- Posts
- 40
Yes I looked at the Stiletto site it would appear the plane blade is a relic from the past. The Mathieson backing iron screws to it ok. So maybe it was bought as a replacement for the origional blade.
Barry.
-
20th May 2011, 10:10 AM #4
Barry,
That Stiletto brand of planes was made by Stanley in the Bailey style for a hardware company 1920s - 1950s, the only name identifying feature is the blade logo. But they had stained hardwood handles, twisted lateral lever, tapered blades in the old style like wooden plane blades.
Here is a #4 I sold to another forum member.
Attachment 170546
More pictures in this post
https://www.woodworkforums.com/f152/h...8/#post1000959
Stanley would absorb another plane maker and release a plane under the old name in this pattern.
There were also more than a couple of retailers that used the same plane with their name on the blade.
Here is a #2 plane in same configuration, named Siegley. It was available in a standard blade, or a tapered one like the Stiletto.
Regards,
Peter
-
20th May 2011, 05:05 PM #5
Hi Barry
This is not a "hybrid" plane but a Mathieson with a replaced blade, one from a Stilletto plane. That it works well is all that is important. Because of that I would not be concerned and just use it as-is.
However the question I have - just my curiosity - is whether the blade is a "parallel" type (that is, an even thickness along its length) or a "tapered" blade (where the business end is significantly thicker than the other end). The Mathieson should have a tapered blade to work at its best. This would close up the mouth and reduce the possibility of tearout.
If you wanted to change the blade, I would look for a tapered blade of the same width from any maker ... althogh Mathieson blades are fairly common at swap meets or eBay. Just be aware that the length of a tapered blade often dictates the thickness at the bevel end, and you want one that will fill the mouth. Still, both opening or closing the mouth are easy enough should this needed.
But, to repeat, if the plane is working to your satisfaction, then just use it as-is.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
20th May 2011, 05:51 PM #6Intermediate Member
- Join Date
- Mar 2009
- Location
- caloundra
- Posts
- 40
Derek, thanks for the great response. My original post was really out of curiosity, after all I'd never want to fix anything that works well. Yes, it is a tapered blade and it appears to hold its edge well. You're right, I was thinking of closing up the mouth a little as it does look like someone in the past has refaced the sole of the plane which in turn would have opened the mouth. Thanks to everybody for their response.
Barry
Similar Threads
-
My first Cambridge Hybrid
By Dave - UK in forum WOODTURNING - PEN TURNINGReplies: 5Last Post: 20th March 2011, 02:37 AM -
Another sort of hybrid
By IanW in forum HAND TOOLS - UNPOWEREDReplies: 12Last Post: 15th December 2009, 09:03 AM -
Hybrid Mill
By rodm in forum CNC MachinesReplies: 26Last Post: 17th August 2009, 11:19 PM