Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: intersting little skewback
-
27th February 2015, 09:48 PM #1SENIOR MEMBER
- Join Date
- May 2011
- Location
- gippsland
- Posts
- 815
intersting little skewback
Found this at the tip the other day was in poor shape, decal reads WFB Amsterdam, just thought 's share it with you all. Sharpened 12tpi rip.
SAM_1222 (800x600).jpgSAM_1223 (800x600).jpgSAM_1224 (800x600).jpg
-
27th February 2015 09:48 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st March 2015, 02:28 PM #2SENIOR MEMBER
- Join Date
- May 2011
- Location
- gippsland
- Posts
- 815
Forgot to ask, how common is a 12" skewback? I personally don't think i've seen too many. At first I thought it was a kids saw but it has a full size(medium)handle.
cheers
Joel
-
2nd March 2015, 07:35 PM #3
Joel, at first sight, I thought it must've been a panel saw or regular handsaw that had a nasty accident, and got cut down to tidy it up. However, the fact that there are only two bolts holding the handle is a giveaway. Even a panel saw usually has at least 3. So my guess is it is a small saw made to fit in a portable tool kit. I'm trying to think of a trade that might have found such a saw handy - it would be something where a very small amount of sawing was necessary, or required sawing in tight spots. A full-size saw isn't that hard to lug around, after all, and would be far more comfortable to use than a 12 incher (for a heavy sawing session, that is).
Hopefully, someone who has a real clue will chip in with some suggestions...
Cheers,IW
-
2nd March 2015, 11:39 PM #4SENIOR MEMBER
- Join Date
- May 2011
- Location
- gippsland
- Posts
- 815
Thanks for the reply Ian, When I seen it I didn't think too much about it, then I thought I'd grab it for my little bloke. Took a little to get it straight and needed to be re-toothed from scratch & re tensioned. The more I thought about it the more curious I got about it. Not sure I want to give it to a 3 year old now(I will cave), I think it would be handy for cutting small pieces of ply and the like.
It it surprisingly comfortable to hold despite the ordinary looking handle, and rather fun to use
I had to refrain from using the word "cute". but it is.
cheers
Joel
-
3rd March 2015, 07:29 PM #5Senior Member
- Join Date
- Jun 2007
- Location
- Queanbeyan NSW
- Posts
- 231
12" saw
If you dig around there is a lot of reference to "junior" tool kits - many of the more expensive British and US ones described them as real tools just like dads. The handle size may seem larger than expected for a childs saw but European saws such as Sandviks always seemed to have a larger handle hole than the equivalent Disstons or S & J's - perhaps there is a history of Northern Europeans wearing gloves and mittens (or a 4 finger grip)
Neil
-
5th March 2015, 02:14 AM #6
This is different, I thought ...
There's still plenty made now in the toolbox saw size ... https://www.google.com.au/search?q=t...2F%3B474%3B439
-
5th March 2015, 06:28 AM #7
"This is a Jennings toolbox saw, with a 10" blade"
-
6th March 2015, 03:35 AM #8
Hi Joel,
I think I see two numbers stamped just below the handle.... 12 & 10. You mentioned that the tooth count is 12tpi. What does the number 10 pertain to? I would normally expect a saw of that size to be filed crosscut. Did you concert the teeth to rip? When you count the teeth per inch, do you count points or gullets? Usually the number stamped on the saw is the point count or PPI.
The actually useful stroke length is about only 10", considering the handle gets in the way of the other 2". A very interesting little saw. You did a very nice job restoring it. It does in fact look to be the original size. During the hay day of sawmaking, Disston was the largest saw maker in the world. In their catalogs, they show that they made their panel saws as short as 16". Twelve is quite uncommon. I have a couple of 16" Disstons. They made the handle size much smaller and advertised them to be used in high school wood shops. All of their smaller saws were crosscuts.
I really like a lot of the smaller saws of various designs made by various saw makers. I have a small collection of them. I've converted a few of them to rip just for kicks.
Again, nice job..
Marv
-
6th March 2015, 06:55 AM #9
Looking at the close-up with the ruler, I count 10 *teeth* per inch ... which would normally be marked as 11ppi.
But I'm guessing that's where the 10(pitch) and 12(length) come from.
Paul
Similar Threads
-
a intersting site, last company of its kind in the UK
By hughie in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 1Last Post: 19th February 2011, 09:47 AM -
Intersting story about a 110v tools imported from states.
By Halfie in forum HAND TOOLS - POWEREDReplies: 22Last Post: 6th January 2009, 07:06 AM -
intersting item on ebay
By Gaza in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 5Last Post: 23rd November 2008, 10:08 PM