Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Some "Lateral" help please!
-
8th November 2008, 05:06 PM #1Novice
- Join Date
- Oct 2008
- Location
- melbourne
- Posts
- 23
Some "Lateral" help please!
I have a No. 4 type 11 plane where the lateral adjustment lever lifts of quite easily from the pin. The pin is still there but it has obviously worn to a point where the lever can fall off.
I'd be greatful for any suggestions on fixing this.
Thanks all.
-
8th November 2008 05:06 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
8th November 2008, 08:27 PM #2
I'm not if this helps or not scoobs but here is a photo of the pin I think you are talking about on a roughy Record No 4 I have lying around.
Perhaps if you peen the top of the pin with a hammer?
Maybe you could cut a suitable nail the correct length and peen that over to solve your problem.- Wood Borer
-
8th November 2008, 08:49 PM #3SENIOR MEMBER
- Join Date
- Oct 2001
- Location
- ACT
- Posts
- 455
Hi Scoobs,
How's your hammering skills? I would suggest peining with a suitable sized ball pein hammer. I have done this before with good results. Just need to make sure the underside of the pin is supported as you dont want any cracked casting there due to hittin too hard on something not supported proberly.
This will work even if there's no pin protruding above the lever - as the pin will be expanded.
Regards,
Steve
-
12th November 2008, 06:57 PM #4Novice
- Join Date
- Oct 2008
- Location
- melbourne
- Posts
- 23
Thanks guys
Thanks for the suggestions guys. I'll try the hammer first and take it frm there.
Cheers
Similar Threads
-
"I see stupid people!" or "spot the blithering idiot"
By journeyman Mick in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 46Last Post: 29th October 2010, 07:29 AM -
Difference "Galvanised" and "Primed" Steel
By Fr_303 in forum METALWORK FORUMReplies: 4Last Post: 22nd January 2008, 05:59 PM -
Triangles, "Copy" and "Past"
By niki in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 8Last Post: 14th February 2007, 08:06 PM -
Turned "red Ash", and "Hairy Walnut?"
By cedar n silky in forum WOODTURNING - GENERALReplies: 7Last Post: 25th July 2006, 02:01 AM -
"Shining gum" or "Nitens" - anyone heard of this
By AshleyM in forum TIMBERReplies: 10Last Post: 15th July 2005, 05:46 PM