Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: full length shaving shrinks?
-
12th April 2011, 05:31 PM #1plane addict
- Join Date
- Oct 2010
- Location
- melbourne
- Posts
- 93
full length shaving shrinks?
this has puzzled me for a while now. Everytime i take a full length shaving and then place that shaving on the edge i just planed they're not the same length! i figured this must have something to do with characteristic of wood. I want answers to this.
-
12th April 2011 05:31 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th April 2011, 03:25 PM #2
Full lenght shaving from the middle of the board or edge of the board?
-
13th April 2011, 05:29 PM #3plane addict
- Join Date
- Oct 2010
- Location
- melbourne
- Posts
- 93
-
13th April 2011, 07:39 PM #4Apprentice implies I know something
- Join Date
- Jun 2010
- Location
- South of Perth
- Posts
- 54
There are a couple of reasons why this would happen, the primary one being that the timber fibres are held under tension by the fibres around then, which is where the spring in timber comes from. By removing the shaving from the rest of the board, you are relieving the tension, allowing the shaving to shrink.
-
15th April 2011, 08:45 PM #5
The shavings that I get from the face are varied as that is what I expect when starting to flatten the board. The ones that I get from the edge are mostly the same thickness. I have at time produced shavings that tend to be thicker on one side then the other, that's because I sometime tend to push more on one side.
Recently I have been planning just for the fun of it, gets a little bit of a work out after work. Being a little more regular.
Similar Threads
-
A Shaving Set
By Whaler1 in forum WOODTURNING - PEN TURNINGReplies: 3Last Post: 14th March 2011, 05:16 PM -
Stanley Plane Plastic Rear Handle Shrinks; Why?
By mike48 in forum HAND TOOLS - UNPOWEREDReplies: 7Last Post: 8th February 2011, 02:29 PM -
A Shaving Set
By Whaler1 in forum WOODTURNING - PEN TURNINGReplies: 7Last Post: 19th January 2011, 09:53 PM -
We've had shaving in the shower..
By havenoideaatall in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 36Last Post: 11th May 2006, 11:35 PM -
Shaving Dilemma: Where do yours go?
By ticklingmedusa in forum WOODTURNING - GENERALReplies: 27Last Post: 8th March 2006, 05:44 PM