Needs Pictures: 0
Results 16 to 30 of 101
Thread: Mystery tool.
-
29th August 2016, 10:08 AM #16Try not to be late, but never be early.
- Join Date
- Apr 2011
- Location
- Bakers Hill WA
- Age
- 75
- Posts
- 1,077
No Stuffy not a lamb ringing tool. Thanks for putting up the links to those two on ebay, NCArcher, I need to learn how to do that. The gripping action doesn't seem very positive in that it appears to rely on spring pressure to close the jaws. It sort of looks like it works back to front, if it was to hold something while you work on it I'd have thought squeezing the handles would open the jaws.
Cheers,
Geoff.
-
29th August 2016 10:08 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
29th August 2016, 11:28 AM #17
Not that this helps much but it is interesting all the same...
AeroElectric Connection - Wire Strippers
I note there is no mention of the StripMaster being an evolution of an earlier design.Franklin
-
29th August 2016, 11:42 AM #18
I have a good quality set of these. Work brilliantly. But, that does not solve the current mystery.
There ain't no devil, it's just god when he's drunk!!
Tom Waits
-
29th August 2016, 12:27 PM #19
I wonder if it may be some type of surgical tool such as for clamping an artery or umbilical cord.
Innovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
-
29th August 2016, 12:50 PM #20
I checked with my wife - Veterinary Surgeon - and she does not think it is for Vet work. Surgical tools are almost always stainless steel.
I'm an electrician and until recently I have been working with HV cable jointers. I don't believe it is a wire stripper.
It looks like it is designed to hold two parts and push them apart. Some sort of spring clip pliers maybe.Those were the droids I was looking for.
https://autoblastgates.com.au
-
29th August 2016, 12:57 PM #21
Could it be a brazing clamp for bandsaw blades?
Innovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
-
29th August 2016, 01:22 PM #22
Rob beat me to it. But that's what came to mind for me. Holds each end of the strip of bandsaw blade while it is brazed into a loop.
…..Live a Quiet Life & Work with your Hands
-
29th August 2016, 01:51 PM #23
The brass/bronze construction would serve well as a heat sink if it is a brazing clamp.
Innovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
-
29th August 2016, 02:24 PM #24
It would be positively mediaeval if it were for surgery, Rob, even veteriary surgery! This thing would be extremely difficult to clean & sterilize adequately, so I think that's a particularly long shot.
We're all still guessing - someone who knows what this is must be out there somewhere - where's Fletty, he's a bit of a pliers specialist, maybe he knows something, or knows someone who does????
Cheers,IW
-
29th August 2016, 02:29 PM #25
-
29th August 2016, 03:32 PM #26
As far as the item operating as a "heat sink" while brazing a band saw blade. Wouldn't that be detrimental? Making the tool hot, and therefor difficult to hold? All the while using your other two hands to hold the flame and brazing rod.
There ain't no devil, it's just god when he's drunk!!
Tom Waits
-
29th August 2016, 03:42 PM #27Member
- Join Date
- Aug 2016
- Location
- WA
- Posts
- 54
Too blunt to be wire strippers
Sent from my SM-T810 using Tapatalk
-
29th August 2016, 04:27 PM #28
Sorry, my 'heat-sink' thought was not meant to be connected with the bandsaw-blade holding comment, EG. You're right, you want to heat the blade quickly & cleanly so as not to temper too much. I've read somewhere that silver-solder is the method of choice; lower temp & stronger than brazing.
The heat-sink role would be more holding some heat-sensitive component whilst you soldered the pigtails into their respective spots. The amount of heat isn't as much as with brazing, & would be soaked up easily by the bulk of the pliers. However, I reckon those pliers predate any electronic parts by many decades, so that was a dumb suggestion, even as a very long shot. Note to self- keep fingers from keyboard until thoughts are properly thunk through......
Cheers,
Cheers,IW
-
29th August 2016, 04:35 PM #29GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Little River
- Age
- 78
- Posts
- 1,205
-
29th August 2016, 05:20 PM #30
Way over here in left field, I'm looking at the pictures and the holders fingers squeezing the legs, not a typical plier handhold.
I wonder if it is actually the mechanism of something more elaborate, it could be mainly hidden behind a plate where the operator squeezes the legs to open a lock or something?Franklin
Similar Threads
-
mystery tool
By thorens in forum METALWORK FORUMReplies: 14Last Post: 29th June 2015, 01:10 AM -
What The...? Mystery Tool
By Boringgeoff in forum ANTIQUE AND COLLECTABLE TOOLSReplies: 45Last Post: 18th October 2013, 08:56 AM -
Mystery tool ID ??
By greg Gurke in forum HAND TOOLS - UNPOWEREDReplies: 4Last Post: 1st September 2011, 10:11 AM -
Mystery Tool ID
By Quasimodo in forum ANTIQUE AND COLLECTABLE TOOLSReplies: 6Last Post: 25th August 2009, 08:26 AM -
Mystery tool
By Arron in forum HAND TOOLS - UNPOWEREDReplies: 11Last Post: 25th May 2008, 02:46 PM