Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 61 to 75 of 132
Thread: Second Paring Chisel Batch Order
-
12th April 2011, 08:34 AM #61Intermediate Member
- Join Date
- Sep 2007
- Location
- Sydney
- Posts
- 46
Helmut,
I am OK to drop my 225mm set to help get to the right sheet number. I need the rest of my order so please leave it in.
Regards
Acer
-
12th April 2011 08:34 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th April 2011, 01:20 PM #62
I'm Happy to drop the long set form batch order1 and the skews, will be happy with a short set.
Hope we are getting close now.
Kevin
-
12th April 2011, 02:19 PM #63
That should be enough I will send an updated quantities to the water-jet cutter, this week.
-
21st April 2011, 08:37 PM #64
Timber for Handles -
I have two sets of 8 Tasmanian Native Olive.
I have enough European Olive for one set. It got allot of color along one side. They do however some checks and splits. Most of it will turn out, but you will need to fill with Super Glue or Epoxy any defects once you get them.
I have also some QLD maple. Its got some lovely figure with quilting, the photo is from a sample.
If you want any of this for your handles post in thread or PM me.
-
24th April 2011, 04:12 PM #65
javali & Christos have each picked up one set of the Native Olive.
We now only have the European Olive, and the QLD maple left.
-
10th May 2011, 01:37 PM #66
I just got of the phone with Russell from Ultimate Laser who is doing the waterjet cutting for us. He says that we have filled the 7 mm sheet. So we are almost ready to go.
We are however now at 90% of the 4.5 mm sheet. We took to much away. So if anyone who dropped off the Fine Paring Chisel sheet wants back in, you are welcome to do so. Otherwise if you have been sitting on the side lines waiting here is your last chance to join in the order.
-
10th May 2011, 02:06 PM #67
Helmut,
For those of us still waiting for our 12mm chisel from the first round, are they going to be cut and ground to match our already provided sets?Kev
-
10th May 2011, 05:46 PM #68
They are the same length, and shape. However they will be 1 mm thicker. Unless you guys really want them 3.5 mm thick. We can mill of that extra 1 mm.
-
10th May 2011, 08:58 PM #691/16"
- Join Date
- Mar 2007
- Location
- Adelaide South Australia
- Posts
- 544
12mm chisels
What would be the extra cost in reducing it to 3.5mm.
My feeling is I would like it to match the other chisels in the setDon't force it, use a bigger hammer.
Timber is what you use. Wood is what you burn.
-
11th May 2011, 03:13 AM #70
Hi TS,
I wouldn't mind some of that Qld Maple. How much do you have and how much is it?
Cheers
OGSome give pleasure where ever they go, others whenever they go!
-
13th May 2011, 09:20 PM #71
It looks like Russell the waterjet guy and I got our wires crossed. We have little to no space left, on the 4.5 mm sheet but we have lots of space left on the 7 mm sheet.
We cannot take more order for paring chisels.
So I can take orders for 6 mm thick blades. Firmer Chisels and Turning Chisels.
Attached are images for the nesting. Showing how much space we have left on each.
-
23rd May 2011, 12:00 AM #72Member
- Join Date
- Feb 2010
- Location
- Perth
- Posts
- 53
Thumbsucker,
A couple of questions for you if you would be so kind.
How are you going filling the M2 sheets?
What would you anticipate as the time frame for these chisels?
When do want us to start send you bucket loads of the folding stuff??
Where do you want us to transfer it too?
Thanks for everything your doing for us!
Regards Mick
-
23rd May 2011, 07:24 PM #73
The 4.5 mm sheet is full about 25% of the 7 mm sheet is left.
Less then two months to start six months from now to finish.
I will send you a PM at the appropriate time.
Accouint details will be PM to you.
-
26th June 2011, 08:14 PM #74
I am ok with RayG doing the grinding.
-
27th June 2011, 06:50 PM #75
Its times to start collecting funds to get the ball rolling on the following orders:
- Paring Chisels
- Firmer Chisels
- Turning Chisels & Scrapers
- Plane Blades for Wooden Handplanes
Now their are 57 members participating across all five orders. Totaling over 406 items. To see a complete list of what you have ordered please see the attached spreadsheet in PDF format I will by the end of this day send out a PM, to everyone of the 57 participants informing them, of what they have ordered, and how much they owe. and into what account they need to transfer the funds into and by what date.
Here is the pdf.
Everyone partaking in the paring chisel order should now have gotten their PM, I am working on the others.
Similar Threads
-
Third Plane Blades for Wooden Hand Planes Batch Order
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 284Last Post: 4th July 2012, 08:57 PM -
Paring chisel making... Lets see em!
By two fingers in forum HAND TOOLS - UNPOWEREDReplies: 79Last Post: 18th November 2010, 09:43 AM -
Paring Chisel Batch Order
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 543Last Post: 24th October 2010, 09:05 AM -
How to hold a paring chisel
By jmk89 in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 31st July 2009, 01:26 PM -
D2 Plane Blades - Batch Order 02
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 259Last Post: 16th November 2008, 08:34 PM