Needs Pictures: 0
Results 1 to 3 of 3
Thread: Planes on the level
-
16th July 2023, 09:22 PM #1Senior Member
- Join Date
- Feb 2023
- Location
- Perth
- Posts
- 389
Planes on the level
Hi All
On the longer planes I glue on bubble levels.
Need go little bit slow for the bubble keep up when jointing. The bubble's are zero'd to my bench- which should be zero'd to ground.
When watching the boards are as square as my square is
I also made both sides of boards parallel when I planed them on top of my bench. I suppose it would be possibe to do tis in a vase but one would need to check the underside is level to the plane on the top.
Have fun..
-
16th July 2023 09:22 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th July 2023, 05:42 AM #2GOLD MEMBER
- Join Date
- Mar 2010
- Location
- US
- Posts
- 3,132
am I correct that if you use this to check an edge, it'll be light-tight? or close?
-
17th July 2023, 10:12 AM #3Senior Member
- Join Date
- Feb 2023
- Location
- Perth
- Posts
- 389
Hi David
The bubble is something to watch during planing. Still possible to have a daft moment and have for example the blade out of square.
For checking typically I invert the timber place it on my bench. With square I place it so it just kiss's the timber, for testing the board is normal to the bench. I generally check for any light gaps as well.
I also keep a "reference" board just above and use that as well - depending but perfer the bench check as it better an picking up slight out of square moments.
Similar Threads
-
SOLD: Veritas Detail Rabbet Planes: set of three planes
By derekcohen in forum WOODWORK - Tools & MachineryReplies: 4Last Post: 22nd October 2020, 07:58 PM -
Stanley Rule and Level Co no93 Spirit Level
By Sapling in forum HAND TOOLS - UNPOWEREDReplies: 2Last Post: 24th May 2010, 07:23 PM -
How level is level - For a lathe
By Pat in forum WOODTURNING - GENERALReplies: 17Last Post: 21st December 2009, 08:37 AM