Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
24th June 2005, 01:53 PM #1
Replacement blade for #53 spokeshave
I have Stanley #53 spokeshave, but need a new blade for it. Anyone know which blade I should use and where to buy it? The hole in the blades of the newer model spokeshaves is too large for the front screw.
Also, I noticed that the blade I currently have bends in the centre. Maybe due to not much cutter left.
-
24th June 2005 01:53 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th June 2005, 11:52 PM #2
Derek, thanks for suggesting the Hock blade. Ron stated that the replacement blade for the #53 spokeshave is the 2" wide #SP200 blade (see #SP200 blade ). Since the #53 has an adjustable throat, it has to be disassembled at the hinge (take out the hinge pins) in order to replace the thin Stanley blade with the thicker Hock blade. Note: metal must be removed from the underside of the hinged part to allow for the thicker blade. Anyway, all the info is at the Hock site.
Similar Threads
-
Rabbet Plane Blade width
By silentC in forum HAND TOOLS - UNPOWEREDReplies: 35Last Post: 22nd July 2005, 12:43 PM -
Grinding (shaping) a blade for a scrub plane
By derekcohen in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 3Last Post: 17th May 2005, 03:14 PM -
Blade setting jigs for sharpening guides
By derekcohen in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 18Last Post: 19th April 2005, 02:30 AM -
Replacement Blade for GMC scms
By GCP310 in forum HAND TOOLS - POWEREDReplies: 16Last Post: 1st October 2004, 08:55 AM -
Blade Height Winder Review
By Noel Butcher in forum TRITON / GMCReplies: 6Last Post: 13th May 2000, 02:31 PM