Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 30 of 35
Thread: Saw Report 5
-
20th August 2014, 09:19 PM #16
STEP AWAY FROM THE BACKSAW !
The backsaw has an (obviously replaced) Wenzloff blade. 14" 13ppi.
20140729_172700.jpg 20140729_172729.jpg 20140729_172801.jpg 20140729_172907.jpg
20140729_172915.jpg 20140729_172958.jpg 20140729_173118.jpg
-
20th August 2014 09:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
20th August 2014, 10:43 PM #17
The table saw, as Paul said, came from Michael Merlo. It wasn't jumped on like pretty much everything else he rehabs ... so at about $50 I couldn't help but put my hand up for it.
It is 15ppi and zero set ... and filed with sloped gullets.
20140729_173135.jpg 20140729_173211.jpg 20140729_173219.jpg 20140729_173255.jpg
The boxed saw was a Simonds from a private seller. I didn't realise how nicely he had packaged it until it arrived here ... so I sent a belated message to say thanks for the effort.
-
21st August 2014, 12:11 AM #18
-
21st August 2014, 12:34 AM #19
Some other items ... some ball-peins and other tools ...
20140731_045754.jpg 20140731_045837.jpg
Bulk lot of socket chisels ... Stanley, Witherby, Fulton, Union ...
20140729_173421 (Medium).jpg 20140729_173435 (Medium).jpg 20140729_173440 (Medium).jpg 20140729_173454 (Medium).jpg
Some carving chisels ... and a bronze (?) chisel ... presumably something to do with mining???
20140729_173500 (Medium).jpg 20140729_173514 (Medium).jpg 20140729_173539 (Medium).jpg
a couple cleaned up a bit on the wire wheel ...
20140801_073758 (Medium).jpg 20140801_073820 (Medium).jpg
and some books ...
20140729_173732 (Medium).jpg 20140729_173747 (Medium).jpg 20140729_174254 (Medium).jpg
-
21st August 2014, 01:24 AM #20
A treasure trove to be certain.
Your brass chisel may be intended for use in potentially explosive atmospheres. At work we use a similar metal in our hydrogen environments. The tools are made from Birilium or at least an alloy that has birilium in it. Spanners and shifters in particular as they do not create a spark when hit or scraped.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
21st August 2014, 08:46 AM #21
Something I forgot to mention about the birilium tools is that they look just like brass. In fact we refer to them as brass. They may not have any brass in them and I believe they are extemely expensive and nowhere near as robust as steel. I do wonder how a chisel would go as far as holding an edge.
I don't think we are about to see a bronze age revival, but it is different .
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
21st August 2014, 02:27 PM #22Senior Member
- Join Date
- Jun 2007
- Location
- Queanbeyan NSW
- Posts
- 231
Beryllium tools
Somewhere in the nonmagnetic anomaly section of he back shed I have a packers axe (blade,hammer head and nail puller/pry in brass/bronze/beryllium. Picked up in the late 70's at a garage sale in Rosehill about mile from the Shell depot and it has the shell cast into the face.
I knew what it was at the time so picked it up as a reminder of my work times in the 60's in the area
Neil
-
21st August 2014, 08:12 PM #23
A passing point about rust, fwiw ... I am in Perth about 20km inland from the coast.
I've left a backsaw on the back patio for something like 6 months ... sitting on a folded towel/rag.
The face up and face down sides look like ...
20140810_231416.jpg 20140810_231425.jpg
At the same time the chest I mini-rehabbed and re-purposed has been out there too ... and ...
20140810_231451.jpg
Looks like that "tin-foiling" around the interior does a pretty damn fine job of stabilising the atmosphere inside.
I did check on it quite often ... at first ... and sprayed some WD40 around the base inside because it smells nice.
I don't know if it could help capture any moisture ... ?
But anyway ... fwiw.
Paul
-
21st August 2014, 08:43 PM #24
Paul
Clearly that worked very well: The chest not the towel .
I noticed a couple of scabbards (leather?) in amongst the goodies. Did those saws come with that, did you get them made and is there anything special inside?
I think it is a shame you are on the other side of the desert (or perhaps it's just as well ) as there looks like a whole lot we could discuss at extraordinary length .
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
22nd August 2014, 03:17 AM #25
Surprisingly for my recent level of performance I found the previous reference ... https://www.woodworkforums.com/showth...68#post1734368
It was an auction on ebay in Qld with two rubbish saws ... so I won it and asked for the leather only.
Two #61s in there now ...
I think it is a shame you are on the other side of the desert (or perhaps it's just as well ) as there looks like a whole lot we could discuss at extraordinary length .
-
22nd August 2014, 04:54 AM #26
When a box arrives, sorting through and disposing of the packaging is part of the fun ... that's what lead to the arrangement of blades precariously purchased on top of the box.
I then did a second scan through while putting them back into the box - in order to avoid immediate garrotting from the boss.
I picked these three as looking interesting and needing a clean before any ID could be made.
In the end it actually only took about 3-5 minutes each to reveal the crucial features.
20140815_185734 (Medium).jpg
Brittain Hoole & Co ... referenced at 1834 (according to Ray's backsaw.net checklist of saw-makers)
20140815_185743 (Medium).jpg 20140815_185750 (Medium).jpg 20140815_191446 (Medium).jpg
A Henry Disston saw from late 1840s/early 1850s ...
20140815_185811 (Medium).jpg 20140815_185828 (Medium).jpg 20140815_185843 (Medium).jpg 20140815_192050 (Medium).jpg
and an early-ish Disston #107
20140815_185926 (Medium).jpg 20140815_185933 (Medium).jpg 20140815_185952 (Medium).jpg 20140815_191043 (Medium).jpg
-
22nd August 2014, 10:17 AM #27
-
22nd August 2014, 06:46 PM #28
Quite a difference to the #107 I already had ... one of my earliest buys ...
20140822_104422.jpg 20140822_104823.jpg 20140822_104851.jpg 20140822_104857.jpg
-
23rd August 2014, 01:30 AM #29
20140822_175801 (Medium).jpg 20140822_175949 (Medium).jpg 20140822_175837 (Medium).jpg
Took a while ... --> Beardshaw & Son
This blog site says from 1819 onwards. I'm guessing at 1840s-60s for this one.
Some saws would have three crowns spaced around the makers mark but I don't see any on this one now.
Not sure what time period the crowns relate to.
http://beardshaw.blogspot.com.au/
http://www.backsaw.net/index.php?opt...read.php&t=523
http://www.wkfinetools.com/huk/beard...shaw-index.asp
-
23rd August 2014, 02:02 AM #30
S&J blade ... 1850-1900 (?) ... with a well-copied 1850/60 (?) style handle.
I don't know what this wood is ... but they have done quite a job in copying an original handle.
20140822_175019 (Medium).jpg 20140822_175236 (Medium).jpg 20140822_175255 (Medium).jpg 20140822_175305 (Medium).jpg
20140822_175204 (Medium).jpg 20140822_175327 (Medium).jpg 20140822_175119 (Medium).jpg
and an american saw ... with what I *think* is an original handle ... somewhat similar wood ...
20140822_175715 (Medium).jpg
20140822_175604 (Medium).jpg 20140822_175623 (Medium).jpg 20140822_175637 (Medium).jpg
We can make out a "22" (model #) and "CAST STEEL" easily ... but there was a makers name arched above that which might have an "ELLIOTT" ???
20140822_175509 (Medium).jpg 20140822_175512 (Medium).jpg 20140822_175529 (Medium).jpg
Similar Threads
-
Saw Report 2
By pmcgee in forum HAND TOOLS - UNPOWEREDReplies: 8Last Post: 20th August 2014, 12:13 AM -
Saw Report 3
By pmcgee in forum HAND TOOLS - UNPOWEREDReplies: 8Last Post: 20th August 2014, 12:01 AM -
Saw Report 4
By pmcgee in forum HAND TOOLS - UNPOWEREDReplies: 25Last Post: 19th August 2014, 11:51 PM -
The Saw Report
By pmcgee in forum HAND TOOLS - UNPOWEREDReplies: 63Last Post: 7th December 2012, 05:46 AM -
An Accident Report
By JDub in forum WOODIES JOKESReplies: 6Last Post: 19th March 2006, 09:59 PM