Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 48
Thread: Rusty Plane
-
2nd March 2010, 03:05 PM #1
Rusty Plane
I recently "won" a Stanley No4 plane on ebay. As you can see it was worth every bit of the $5.00 I paid for it. I plan to have a bit of fun doing it up and giving it to one of my brothers as a birthday present in June this year. Yep that's a plastic tote and I think I have the where with all to attempt to make another one. I will need to find a local wood turner who would turn up a new knob. I know it would be easier to just buy a new set from a supplier but this is more interesting.
So here's the problem, a few years ago I cleaned up some old tools of my fathers using a lanolin oil in an aerosol can. It did a fantastic job. I sprayed all the components and left them sitting in an ice cream tub for a week and they all cleaned up beutifly with steel wool and fine emery paper.
So the can finally ran out and I went to Bunnngs to get another one. Only to find that they don't sell it any more and I can't remember what it was called. Just that it was in a green can. I eventually found a can of lanolin spray at BCF but this doesn't do the job at all. I read somewhere that some one achieved good results using molasses and coke. Is this true and does anyone know what the recipe is if it is true?
-
2nd March 2010 03:05 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd March 2010, 04:36 PM #2
Yep, there was a thread the other week about cleaning rusty tools, I use the molasses 50/50 with water, degrease first then drop everthing in may take one day or it might take a few, depends on the amout of rust. Just rub gently with a little steel wool on the bad areas while the goop is on. The Spray be be Lanox, blue can, most boating suppliers some garages etc have it. Handles, if you check the markets, ebay again etc you will usualy pick up another plane for parts cheaper than just buying handles.
-
2nd March 2010, 06:41 PM #3Senior Member
- Join Date
- Jan 2009
- Location
- The Shire
- Posts
- 325
Well done. A No4 is always handy and you got it a pretty good price too. Very common plane so if you bugger this one you can easily get another.
As for rust removal I've tried a few things. Citric acid works well but can be a bit aggressive. I like molasses too. I use a 1 part molasses to 20 parts water solution. Works well takes a little longer than 50/50 but still does the job. I also like using electrolysis. Need a few more gizmos than just molasses ad water but works really well and is a interesting experiment. Here's a link: ELECTROLYTIC RUST REMOVAL (ELECTROLYSIS)
And if your lanolin spray product is Lanotec I know you can get it at Supercheap Auto and Repco.
Have fun,
Virg.
-
2nd March 2010, 07:12 PM #4Jim
- Join Date
- Feb 2008
- Location
- Victoria
- Posts
- 3,191
I was converted to vinegar on this forum. It works. I use cleaning vinegar which is available in the supermarkets and soak the parts in it, usually overnight sometimes much much longer. It's just a matter of cleaning the scunge off then.
Cheers,
Jim
-
2nd March 2010, 08:45 PM #5
-
2nd March 2010, 08:57 PM #6
Yes the vinigar does work quite well too, just I have 20ltr drum of Mol and don't mind dipping my fingers in now and then too. Vinigar isn't quite so nice. 20:1 Mol& water I think I would grow old waiting for that to work.
-
2nd March 2010, 09:04 PM #7
-
2nd March 2010, 11:03 PM #8
And if your lanolin spray product is Lanotec I know you can get it at Supercheap Auto and Repco.
Lanotec sounds familiar. If it came in a green can then that's probably it. Havn't been in a Repco for years. I'l have a look this week.
Steve.
-
3rd March 2010, 12:36 PM #9
-
4th March 2010, 03:23 AM #10
-
4th March 2010, 06:15 AM #11Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Vinegar is acetic acid. If you're in a hurry you can use phosphoric acid (sold as Rust
RemoverDissolver at Repco) but use gloves, safety glasses etc.Cheers, Ern
-
4th March 2010, 07:45 AM #12
How do you reckon Rust Remover would go on files?
(apols for the hijack)"We must never become callous. When we experience the conflicts ever more deeply we are living in truth. The quiet conscience is an invention of the devil." - Albert Schweizer
My blog. http://theupanddownblog.blogspot.com
-
4th March 2010, 08:12 AM #13Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Correction: it's Rust Dissolver
Files? dunno. You paint it on, let sit for 10-15 mins, then wipe off with damp cloth, and dry with cloth.Cheers, Ern
-
4th March 2010, 02:59 PM #14
Just tried some lemon juice on a tree saw blade......it's a good start. Wash down with water, then on to the wet n dry and light oil technique.
Still plenty of rust though (there was a lot to start with), I've got some phosphoric acid and might try that later.
With the lemon juice, I just squirted it on, brushed it even and waited a few minutes.....the rust started to pool on top of the lemon juice.....not bad.We don't know how lucky we are......
-
4th March 2010, 05:25 PM #15Retired
- Join Date
- Jan 2010
- Location
- California USA
- Age
- 74
- Posts
- 31
Navil Jelly is great. It is a rust remover the US Navy developed.
You can use electrictiy in a vat to remove rust. There is more to it. You can look it up on the web.The word Vegetarian is an Indian word for bad hunter.
Similar Threads
-
Rusty chuck.
By Caveman in forum WOODTURNING - GENERALReplies: 7Last Post: 13th November 2007, 05:24 AM -
RIP Rusty the shed dog
By Glenn_M in forum Hatches, Matches & Dispatches. Birthday greetings and other Touchie-feelie stuff.Replies: 23Last Post: 20th April 2007, 05:02 PM -
rusty bits
By goat in forum WOODIES JOKESReplies: 0Last Post: 30th August 2006, 02:16 PM -
Rusty Tools..?
By John Saxton in forum HINTS & TIPSReplies: 24Last Post: 1st October 2003, 11:50 AM -
rusty nails
By ihandy in forum WOODTURNING - GENERALReplies: 6Last Post: 1st August 2002, 02:17 PM