Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: How big is a Stanley #3 plane?
-
26th August 2014, 12:08 PM #1New Member
- Join Date
- Sep 2013
- Location
- Brisbane
- Posts
- 5
How big is a Stanley #3 plane?
I've just bought a Stanley #3 at a tool sale, new-old stock as they call it. ie been sitting unused since it was originally bought. It's not that old, it's got a synthetic tote and knob. My question is what the length is supposed to be? According the usual sites for Stanley planes the #3 is 8" long as against 9" for a #4 but this is almost the same length as the #4, though it's the right width for a #3. Did Stanley change the length of the #3 in latter years?
-
26th August 2014 12:08 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th August 2014, 07:53 PM #2
Is it cast with the number?
The #5-1/4 is the width of a number three but longer ... I quite like it.
Cheers,
Paul
-
26th August 2014, 10:35 PM #3GOLD MEMBER
- Join Date
- Apr 2012
- Location
- Sydney
- Posts
- 1,503
Lots of dimensions here: http://supertool.com/StanleyBG/stan1.htm#num3
-
26th August 2014, 10:49 PM #4Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
-
27th August 2014, 12:32 AM #5Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,357
-
27th August 2014, 11:58 AM #6<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <woNotOptimizeForBrowser/> </w:WordDocument> </xml><![endif]-->
-
28th August 2014, 08:45 AM #7
You may be better off with the longer version of the #3 if you own average to large hands. It's been a long time since I used a straight #3, but I have both a Record 110.5 and a Stanley 10.5, which are pretty much the same size as the smaller #3. There is precious little room for fingers between the rear handle & adjustor knob. The Record in particular is a bit of a knuckle-buster if you are not careful. I know with #4s you get about 1/2" or so variation in length depending where/when it was cast, but that Australian #3 of Peter's is 1.5" longer than 'standard'. Perhaps the blokes at Titan-Stanley just decided to give us more finger room??
There is definitely a place for a 'short' smoother or two in my shed, but once you go shorter than the #4, I reckon it gets a bit too cramped to fit handles & adjusters in the space available, with the Bailey type. For short planes, solid-bodied ones like a 'coffin' woodie, or an infill with a rear bun instead of a tote, are my idea of practical. I don't have a small infill yet (it's still on the drawing board, where it's been for some years! ) but I did make a couple of small smoothers a while back and one of those has been a real winner. I also recently built a short smoother in the Krenov style using the Lee Valley kit (for a review, which should be in the next AWR, if you're interested). I'm not a big fan of the laminated body way of building planes, but it turned out to be quite a nice little plane, & quite comfy to use. If you follow the kit instructions, you end up with a plane that's about the same length as a #3, but the blade is slightly narrower at 1 5/8".
Cheers,IW
-
28th August 2014, 02:50 PM #8
mine is 9-1/8" long including the bit where the tote overhangs the sole in back. it's 2-1/8" wide, with a 1-3/4" wide cutter.
my millers falls #4 equivalent (mf #9) is 9-1/4" long, and that bit at the back is flush with and part of the sole. it's 2-3/8" wide, with a 2" cutter.
I have a basket case stanley #4 which is 9-7/16" long, 2-5/16" wide and has a 2" cutter. it has the bit at the back raised away from the sole.
I have a craftsman/sargent #4 size that is 9-3/4" long, 2-7/16" wide and has a 2" cutter. it also has the handle bit at the back flush with the sole.
my #4-1/2 stanley is 10-1/4" long, 2-3/4" wide with a 2-3/8" cutter. it has a little of that bit at the back where the tote hangs over, but less than the #3 or #4, and that part is flush.
-
8th September 2014, 01:12 PM #9New Member
- Join Date
- Sep 2013
- Location
- Brisbane
- Posts
- 5
Thanks,
Peter gets the cigar, I'd checked Superworks and a couple other sites that are usually a mine of information and all were quite specific that the number 3 was 8" long. I'd even been told I had a fake, though making a copy of a plane that could have been made in the early 1980's didn't make sense. That said the Lie Nielsen "copy" is also 9" long, which suggests Stanley decided to make room for full sized hands, at least in Oz and that's the size plane Lie Nielson based theirs on.
Thanks,
-
9th September 2014, 02:58 AM #10
Yeah, those plastic handled stanley planes are fakes... made by a company called stanley, trying to fool you into thinking that they are real planes made by the stanley company....
Similar Threads
-
Home Made Round Chamfer Plane Using A Stanley Smoothing Plane
By mike48 in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 8th January 2013, 10:17 AM -
Stanley #8 and Stanley #62 LA Plane
By Shedhand in forum HAND TOOLS - UNPOWEREDReplies: 5Last Post: 19th April 2006, 03:04 AM