Found this plane on line just begging to be cleaned up.
Stanley #6 type10 pic1 (Large).jpg

Turned up to be a Type 10, but the yellow tagging had to go.
Stripped it down, gave it a bath in electrolysis, and had to hand sand the tote and knob.
DSCF1297 (Large).JPG
DSCF1296 (Large).jpg

Next comes the finish on the parts.
Tote and knob where done with real tung oil and finally finished with a wipe on poly.
Paint on the bed was a engine block paint, need to put another coat or two
after a week of drying.
DSCF1319 (Large).JPG

So almost done with the cleanup, sole and sides need to flattened.