Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 91 to 105 of 943
-
26th May 2010, 08:39 PM #91
Neil and Liam I have added you to the list.
-
26th May 2010 08:39 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th May 2010, 10:39 AM #92
TS
Can you put me down for two No 2" blades with bevels and cap irons.
Also, I would like four No 2 3/8" cap irons to go with blades from the first order, preferably ground.
I haven't got a Stanley/Record block plane yet but have been looking. Is there a common size that I can get knowing it will fit?
Kapex
-
27th May 2010, 05:08 PM #93
Kapex I have added you to the list.
The only block plane blade we are looking to make is for 60 1/2, however their are two versions of the blade one has 3 slots and one has 11 slots. I am hesitant about the slots.
Their is so little interest in the block plane blades we may end up dropping them at this rate.
We are up to 130 blades allocated this means we have about 70 blades still up for grabs.
I will start the production of the Stanley blades within two weeks. The hope is to allocate the remaining blades during the production process.
-
27th May 2010, 06:02 PM #94
TS
Thanks for adding me, I will wait and see what happens with the block plane blades.
What about making spokeshave blades to use the steel or is that just too hard?
Kapex
-
27th May 2010, 06:22 PM #95
We have an option for 2 1/8" spoke shave blade for the Stanley #51/#52 and Record/Stanley #151 spokeshaves.
These are easy to make.
-
28th May 2010, 10:41 AM #96
TS
Missed the spokeshave blades.
Please put me down for two
Kapex
-
28th May 2010, 03:04 PM #97GOLD MEMBER
- Join Date
- Jun 2003
- Location
- Sunbury, Vic
- Age
- 84
- Posts
- 2,718
TS
Can you put me down for 1 only 23/8 blade complete with cap iron and screw.
Also 1 only 23/8 inch cap iron and 1 only 2 inch cap iron to replace the short ones from first order.
ThanksLast edited by Chesand; 28th May 2010 at 03:09 PM. Reason: corrected terminology
Tom
"It's good enough" is low aim
-
3rd June 2010, 09:38 AM #98Enthusiatic Amateur
- Join Date
- Jun 2007
- Location
- Toowoomba
- Posts
- 144
Plane Irons
G'day TS,
Please put me down for:
2 x 2" Irons with bevel, cap irons and screws (Stanley #4 & #5).
1 x 13/8 (35mm) iron with bevel, cap irons and screws (Stanley 601/2).
Cheers
Brian
-
3rd June 2010, 10:03 AM #99Intermediate Member
- Join Date
- Apr 2005
- Location
- Sydney
- Posts
- 46
TS, please add a spokeshave blade to my order, thanks.
Rick
-
3rd June 2010, 12:52 PM #100
RickR - I have added the spokeshave
Dovetail - What do you mean by 1 3/8" we have no such blade, do you mean 2 3/8"?
Chesand I have added you.
We have a 122 blades allocated. When are almost ready to start the order.
-
3rd June 2010, 04:19 PM #101
60 1/2 Block Plane blade measurements
Helmut
Please find attached dimensioned sketch & Photo of my Stanley Block Plane G12 - 060.
Can you please add one of these to my list
Regards
-
3rd June 2010, 08:57 PM #102
Additional blades
Hi Thumbsucker
Can I please add to my existing order the following:
1 spokeshave blade
2 blades to suit older style 60 1/2 block plane. I can drop an unused blade off if you want to use as a template. Let me know.
Cheers
SC
-
3rd June 2010, 09:17 PM #103
Saw Crack I have added you.
BasilG there were no files attached to your last post.
-
4th June 2010, 12:23 AM #104
G'Day
If I can add two 2" blades with chipbreakers and screws for my No4 I'd be grateful.
Many thanks
Horaldic
-
4th June 2010, 12:30 PM #105
Horaldic I have added you to the list. We have about 72 blades left
Similar Threads
-
Stanley Bench Planes Replacement Blade Bulk Order
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 1385Last Post: 21st September 2009, 08:30 PM -
How to install an old wooden plane blade into a stanley.
By JDarvall in forum HAND TOOLS - UNPOWEREDReplies: 17Last Post: 2nd September 2006, 06:46 PM