Thread: The Second Stanley Plane Blade Order

Helmut

photo and blade dimensions attached

Could you please put me down for a 60mm (2 3/8") blade for a Stanley 5 1/2. With bevel, no cap iron.

Originally Posted by Vann

Hi TS,

I see you have me down for 2 x 2" irons. Kindly cut that back 1 iron (three total).


Cheers, Vann.

Vann - would you be keen on sharing the postage to NZ?

Originally Posted by NZStu

Vann - would you be keen on sharing the postage to NZ?

Hi Stu,

Yes I would be interested in combining postage (and payment costs). However we may be able to do even better than that. Seanz MAY (possibly, maybe) be able to collect them for us, depending on timing. He was able to collect last order, which was great.

With regard to payment : the banks charge around $20 - $25 per transaction to transfer funds to Aussie, so If we got together around payment time we could combine payment and share that cost proportionally.

PM me closer to the time and we'll see what we can do.

Cheers, Vann.

NZStu I have added you to the list.

Another option, is to use paypal, virtually no charges. We have used it successfully for previous orders, for members in Canada and the USA.

Originally Posted by Vann

Hi Stu,

Yes I would be interested in combining postage (and payment costs). However we may be able to do even better than that. Seanz MAY (possibly, maybe) be able to collect them for us, depending on timing. He was able to collect last order, which was great.

With regard to payment : the banks charge around $20 - $25 per transaction to transfer funds to Aussie, so If we got together around payment time we could combine payment and share that cost proportionally.

PM me closer to the time and we'll see what we can do.

Cheers, Vann.

Cheers Vann. As TS said, paypal will be more convenient and cheaper than faffing around with the banks.

Originally Posted by NZStu

Cheers Vann. As TS said, paypal will be more convenient and cheaper than faffing around with the banks.

I guess I'll have to join Paypal !

Cheers, Vann.

Hi TS,

I'm looking at getting in on this buy as well and hope to get about 8 blades - for a near complete set of type 6 stanley bedrocks :0) . Can you please pencil me in and I'll confirm this weekend when I get back out in the shed.

Cheers
Dave W.

Hi TS,

Can you add to my order:

1. one off 2 & 3/8" blade, chip breaker and bevel grinding
2. bevel grinding to my existing order (which was for a #4 with chip breaker).

Thanks

I have added you Ern.

Originally Posted by rsser

Hi TS,

Can you add to my order:

1. one off 2 & 3/8" blade, chip breaker and bevel grinding
2. bevel grinding to my existing order (which was for a #4 with chip breaker).

Thanks

Originally Posted by NZStu

Could you please put me down for a 60mm (2 3/8") blade for a Stanley 5 1/2. With bevel, no cap iron.

Could you also add another one to my order? A 2" for a Stanley #4, with bevel, no cap iron.

I figure there's no sense upgrading the 5 1/2 by itself when the 4 is likely to get more use in the long run...

STU I have updated your order.

We are now at 149 blades allocated.

Once I hear back from old gunny and Gordon, then I think we should be at about 170 blades and we will start the ball rolling.

Hi TS,

If you're still trying to make up numbers I'll jump in with a request for
1x 2" and 1x 2 3/8" for stanley record, both with cap irons and bevelled. I've got to the point where I'd like to play around with some blade upgrades.

Thanks,
Franklin

Hi Franklin - I have added you to the list.

A couple more if there is room please Helmut

2 x 2" blades
2 x 2" cap irons

2 x 2 3/8" blades
2 x 2 3/8" cap irons

All blades bevelled please.